User's Manual

“More than just Digital” Page 34 of 81
Doc. Name: PEDRA User’s Manual/Doc. No.: PEDRA-1417M-UM
Initiate date: 2020.07.25 /Revision date: 2020.10.15 (Rev. 1)
3.3 PEDRA-PCON Connection
1) To transmit image data and generator signal using a tether cable, connect the one end of the tether
cable to the PEDRA-PCON and the other to the detector.
2)Connect the one end of the LAN cable to the PEDRA-PCON, and the other to the LAN Card Connector of
workstation assigned for the Data Transfer.
3) 4pin SYNC cable connects hand switch and the PEDRA-PCON. It transmits signals to control the signal
from generator. It is particularly designed for manual mode.
4)Connect the one end of the generator SYNC cable, 6pin to the PEDRA-PCON, and the other to the port of the
X-ray generator.
5)Detector Power On/Off switch
6)USB 2.0 cable connects work station computer and the PEDRA-PCON, transmits signals to control the signal
from generator. It is particularly designed for manual mode.