User's Manual

This module has been tested for compl
2.3 Summarize the specific operational use conditions
The module is tested for standalone mobile RF exposure use condition. Any other usage
conditions such as co-
location with other transmitter(s) or being used in a portable conditio
need a separate reassessment through a class II permissive change application or new
certification.
2.4 Limited module procedures
Not applicable.
2.5 Trace antenna designs
Not applicable.
2.6 RF exposure considerations
This equipment complies with
FCC mobile radiation exposure limits set forth for an uncontrolled
environment. This equipment should be installed and operated with a minimum distance of 20cm
between the radiator & your body. If the module is installed in a portable host, a separate SAR
evaluation is required to confirm compliance with relevant FCC portable RF exposure rules.
2.7 Antennas
The following antennas have been certified for use with this module; antennas of the same type with equal or
lower gain may also be used with this modul
maintained between the antenna
(refer to
Antenna Type
Antenna connector
No.
Transmitter
Circuit
Brand
Model
1
Chain(0)
Chain(1)
Sparklan AD
-
2
Chain(0)
Chain(1)
Sparklan AD-
103AG
3
Chain(0)
Chain(1)
Sparklan AD
-
4
Chain(0)
Chain(1)
Sparklan AD
-
Wireless Module
This module has been tested for compl
iance to FCC Part 15.
2.3 Summarize the specific operational use conditions
The module is tested for standalone mobile RF exposure use condition. Any other usage
location with other transmitter(s) or being used in a portable conditio
need a separate reassessment through a class II permissive change application or new
FCC mobile radiation exposure limits set forth for an uncontrolled
environment. This equipment should be installed and operated with a minimum distance of 20cm
between the radiator & your body. If the module is installed in a portable host, a separate SAR
evaluation is required to confirm compliance with relevant FCC portable RF exposure rules.
The following antennas have been certified for use with this module; antennas of the same type with equal or
lower gain may also be used with this modul
e. The antenna must be installed such that 20 cm can be
(refer to
the Page 9, Antenna Approved List)
and users.
Dipole
RP-SMA
Model
Antenna
Type
2.4G gain
with cable
loss (dBi)
5G gain
with cable
loss (dBi)
-
300N Dipole 3 5
103AG
Dipole 2.02 2.03
-
302N Dipole 3 2
-
303N Dipole 3 3
Wireless Module
The module is tested for standalone mobile RF exposure use condition. Any other usage
location with other transmitter(s) or being used in a portable conditio
n will
need a separate reassessment through a class II permissive change application or new
FCC mobile radiation exposure limits set forth for an uncontrolled
environment. This equipment should be installed and operated with a minimum distance of 20cm
between the radiator & your body. If the module is installed in a portable host, a separate SAR
evaluation is required to confirm compliance with relevant FCC portable RF exposure rules.
The following antennas have been certified for use with this module; antennas of the same type with equal or
e. The antenna must be installed such that 20 cm can be
and users.
with cable
Connector Type
RP-SMA