Specifications

ManualsBrandsSparkLAN ManualsIndustrial & Scientific802.11a/b/g/n 2T2R Industrial Grade Mini PCIe Moudule

Wireless Module

www.sparklan.com / sales@sparklan.com / +886 2 2659-1880

WNFB-263ACNI(BT)

ver.1.0

WPEA-252NIRB

Specification

Standards:

IEEE 802.11abgn (2T2R)

Chipset:

Qualcomm Atheros QCA9592-AR1B

Data Rate:

802.11b: 11Mbps / 802.11a/g: 54Mbps / 802.11n: 300Mbps

Operating Frequency:

IEEE 802.11 a/b/g/n ISM Band, 2.400GHz ~ 2.4835GHz,

5.150GHz ~ 5.825GHz

*Subject to local regulations

Interface:

Mini PCI Express

Form Factor:

Mini PCI-e

Antenna:

2 x HRS U.FL connectors for 2T2R

Modulation:

802.11b: DSSS (DBPSK, DQPSK, CCK)

802.11a/g: OFDM (BPSK, QPSK, 16-QAM, 64-QAM)

802.11n: OFDM (BPSK, QPSK, 16-QAM, 64-QAM)

Operating Voltage:

3.3V ± 9% I/O supply voltage

Temperature Range:

-40°C ~ +85°C (Operating) / -50°C ~ +90°C (Storage)

Humidity

(Non-Condensing):

Operating Humidity (non-condensing): 10% ~ 85%

Storage Humidity (non-condensing): 5% ~ 90%

Power Consumption:

Continue TX: 700mA / Continue RX: 300mA

Dimension (in mm):

29.85 x 50.8 x 2.86 mm (± 0.5mm)

Weight (g):

Driver Support:

Linux

Security

64/128-bits WEP, WPA, WPA2, 802.1x

Summary of content (7 pages)

PAGE 1
Wireless Module WPEA-252NIRB Specification Standards: Chipset: Data Rate: Operating Frequency: Interface: Form Factor: Antenna: Modulation: Operating Voltage: Temperature Range: Humidity (Non-Condensing): Power Consumption: Dimension (in mm): Weight (g): Driver Support: Security IEEE 802.11abgn (2T2R) Qualcomm Atheros QCA9592-AR1B 802.11b: 11Mbps / 802.11a/g: 54Mbps / 802.11n: 300Mbps IEEE 802.11 a/b/g/n ISM Band, 2.400GHz ~ 2.4835GHz, 5.150GHz ~ 5.
PAGE 2
Wireless Module Federal Communication Commission Interference Statement This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules.
PAGE 3
Wireless Module FOR MOBILE DEVICE USAGE (>20cm/low power) Radiation Exposure Statement: This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator & your body.
PAGE 4
Wireless Module OEM/Host manufacturer responsibilities OEM/Host manufacturers are ultimately responsible for the compliance of the Host and Module. The final product must be reassessed against all the essential requirements of the FCC rule such as FCC Part 15 Subpart B before it can be placed on the US market. This includes reassessing the transmitter module for compliance with the Radio and EMF essential requirements of the FCC rules.
PAGE 5
Wireless Module Cet appareil est conçu uniquement pour les intégrateurs OEM dans les conditions suivantes: (Pour utilisation de dispositif module) 1) L'antenne doit être installé et exploité avec plus de 20 cm entre l'antenne et les utilisateurs 2) Le module émetteur peut ne pas être coïmplanté avec un autre émetteur ou antenne.
PAGE 6
Wireless Module The end user manual shall include all required regulatory information/warning as show in this manual. Manuel d'information à l'utilisateur final L'intégrateur OEM doit être conscient de ne pas fournir des informations à l'utilisateur final quant à la façon d'installer ou de supprimer ce module RF dans le manuel de l'utilisateur du produit final qui intègre ce module.
PAGE 7
Wireless Module DETACHABLE ANTENNA USAGE This radio transmitter (IC: 6158A-WPEA252NIRB / Model: WPEA-252NIRB) has been approved by ISED to operate with the antenna type listed below with maximum permissible gain indicated. Antenna types not included in this list, having a gain greater than the maximum gain indicated for that type, are strictly prohibited for use with this device.