Operation Manual

Page 21 of 57
RD-OI-20 A/3
X-ray Tube
X-ray Generator
DROC Workstation
Shielded X-ray Room
RS232 Cable
Gigabit LAN Cable
Wireless AP
CareView 750Cw
IEEE802.11n
Control Panel
Figure 11 Software sync mode
A typical configuration for software sync mode of a DR system integrated with CareView 750C is
shown in the figure below.
X-ray Tube
X-ray Generator
DROC Workstation
Shielded X-ray Room
RS232 Cable
Gigabit LAN Cable
Power Box
Interface Cable
AC 100V-240V
CareView 750C
Figure 12 Software sync mode
3.2.3 Manual Sync Mode
There is no sync exposure signal interaction between the detector and an X-ray generator. Users should
control exposure time manually according to exposure recommendations provided by acquisition
software.