Operation Manual

Page 27 of 57
RD-OI-20 A/3
4.2 Hardware Installation
4.2.1 CareView 750Cw
1 Place a fully charged battery inside the detector
First, open the cover plate of the battery compartment on the back of the detector. Then, slide the
battery into the battery compartment of the detector. Verify that the claws on the battery are
aligned with the grooves on the battery compartment. Then, place the cover of battery onto the
plate and securely fasten the screws in place.
Figure 18 Place the battery
2 Press the power button of the detector for approximately 3 seconds to turn on the detector. Make
sure the ‘Power LED’ displays a green light.