Operation Manual

Page 37 of 57
RD-OI-20 A/3
Auth mode
WPA2PSK
Encrypt type
AES
WPAPSK(Password)
abcdefghij
Note:
1) The value of ESSID/ WPAPSK of the detector and the wireless AP should be the same.Avoid
overlapping with other systems to prevent confusion.
2) The wifi band and channel should comply with the local regulations. In several cases, wifi quality
is better in the 5GHz band compared to the 2.4GHz band. If possible and allowed in the country of
use, CareRay recommends using the 5GHz band.
3) Country of use must be declared if wifi is used.
5.4 Detector Wireless Information
If wireless AP is selected and configured by the user, the ESSID value of the detector and wireless AP
should be the same. Take necessary precaution to avoid ID collision.
1 Set the IP of the DROC station to 192.168.68.100. see chapter “4.3 Network Configuration”
2 Connect the detector through LAN cable.
Figure 37 Wired connection
3 Open an IE browser and type the detector configuration page address:
http://192.168.68.1/cgi-bin/index.cgi. Pressing the 'Enter' button pops up the following dialog box.