User's Manual

5.2 How to Change Color Depth and Resolution

1. Make sure that you have installed windows95/98 Driver.

2. Click on the Start box in the lower left corner and proceed to Control Panel.

3. Inside the Control panel group , click on Display icon to open the Display

Properties folder and select the Setting table

4. Click on the pull-down arrow from the Color palette area to select color depth or

adjust the sliding bar to either Less or More from the Desktop area

5. Select OK to restart WINDOWS95 and new color depth or the new resolution

takes effect.

5.3 How to Change Refresh Rate

1. Make sure that you have installed windows95/98 Driver. Click on the Start box in the

lower left corner and proceed to Setting, Control Panel

2. Inside the Control panel group , click on Display icon to open the Display Properties

folder and choose Settings click the Advance Settings choose Adapter

3. Click on the Refresh Rate sub window to change refresh rate

4. Select OK and new refresh rate takes effect

Note: If your monitor is not Branded or Plug&Play, you will only see Adapter default and

optimal. Please contact your monitor supplier to get right or compatible drivers for your

monitor. Otherwise you can not select the refresh rate you wanted.