User Manual

26
1. Abort cycle mode with the buon VALUE / +
2. Select a desired value by repeatedly pressing
the buon VALUE / +
3. Push the buon SET / OK . The displayed
value remains on the display.
4. To return to the cycle mode, push the buon
. About 30s later, will automacally
enter into cycle mode.
VALUE / +
Consumpon history
Your Power Meter records the energy consump-
on of a connected device for a prolonged
period of me. The measured values are most
usable if they are recorded for the same con-
sumer. The consumpon is recorded as a bar
connected. Seconds are shown up to 99:59:59
hh:mm:ss. No more seconds are shown from
100 hours and more. Maximum display of up to
9,999:59 hhhh:mm.
TOTAL COST (costs for the total measurement
me) The total costs for the power consumpon
are displayed. The consumpon for night-me
current is also considered (if entered).
GHG (greenhouse gas emissions CO2 in kg)
Seng a specific measured value