manual

3
The DIGISCALE accepts PC and DVI inputs. The formats supported by these inputs are as follows:
- When connecting to a PC source use a 15-pin D-sub cable to connect the
output of a PC to the D-Sub input connector of the DIGISCALE.
- When connecting to a DVI source, use a DVI-I or DVI-D cable to connect the
DVI output of a PC or DVD to the DVI input connector of the DIGISCALE.
- When connecting to a HDMI source, use a HDMI cable to connect to the HDMI
output of a HDMI source, such as DVD or STB, on the one end.
And use a HDMI to DVI connector adaptor to connect to the other end of the
HDMI cable. The DVI connector of the adaptor is then connect to the DVI input
of the DIGISCALE.
The DIGISCALE can automatically detect the input resolution of all inputs.
To switch from one input source to another just press the input button on the front panel ("+")
or on the remote control.
The DIGISCALE can output a variety of PC, SD and HD resolutions in both digital
and analog format simultaneously.
The digital output is available from the DVI output connector while the analog output is available
from the PC D-sub output connector.
The digital output supports the following resolutions, all in RGB format:
INPUT
Resolution/Refresh
Rate
D-
SUB
DVI/HDMI
480I/576I(NTSC/PAL)
x *
480P/576P
V V
720P@(60/50)
V V
1080I@(60/50)
x V
1080P@(60/50)
V V
1080P@24
X V
VGA@(60/72/75/85)
V V
SVGA@(56/60/72/75/85)
V V
XGA@(60/70/75/85)
V V
SXGA@(60/75/85)
V V
UXGA@60
V V
WXGA@60(1280x800)
V V
WSXGA@60(1680x1050)
V V
WUXGA@60(1920x1200)
V V
WXGA+ @60 (1440x900)
V V
SXGA+@60 (1400x1050)
V V