User manual

(8). Remote Control
1. Display: Press the button to display input source
and output resolution on the screen.
2. Power: Power ON/OFF button.
3. VGA~1080p: Press to select your desired
output resolution.
4. Picture: Press the button to enter picture
3 1
2
VGA SVGA XGA
adjust submenu. Use +,- button to move
cursor (V) up/down to your desired
WXGA
SXGA
UXGA
VIDEO
8
parameter, press "Picture" again to
confirm.
480p 576p
WUXGA
SVIDEO
9
5. +/-: Press to move up/down the cursor (V)
to your desired parameter,or press to
720p 1080i
1080p
increase/decrease the setting value.
6. Reset: Press to reset all setting back to
PICTURE -
+
4
5
factory default value.
7. Exit: To exit OSD.
8. Video: Press the button to select
composite video input.
9. SVideo: Press the button to select
SVideo input.
RESET EXIT
6
7
CR-58
(9). Specifications
Input Signal Levels
Video@1Vp-p, 75 ohm, Y@1 Vp-p, 75 ohm
Color@ 0.7 Vp-p, 75 ohm
Output Format Digital RGB
Output Connector DVI-I Connector
Output Singnal
Bit stream
Weight(g) 400
Dimensions(mm)
125(W) x 123(D) x 30(H)
Operating Temperature
0°C~40°C
Silkscreen Color
Process Blue
Output Signal Specifications
HDTV (RGBHV)
-RGB
-RGB
-RGB
-RGB
-RGB
UXGA
-RGB
WUXGA -RGB
1600 x 1200
1920 x 1200
1080p-RGB
1080i-RGB
720p-RGB
576p-RGB
480p-RGB
1920x1080p
1920x1080i
1280X720
720X576
720X480
follow input source
follow
input source
follow
input source