Datasheet

129
www.spaun.com [e-mail]
CATV
CATV
Model
Art. No.
HNV 30 UPE
811269
HNF 30 URP
811304
EAN 4040326112694 4040326113042
Inputs / Outputs 1 / 1 1 / 1
Screening factor > 85 dB > 85 dB
Gain 47 ... 862 MHz 30 or 20 dB 30 or 20 dB
Output level max.
60 dB IMA
3
/ EN 60728-3
max. 108 dBμV max. 108 dBμV
Level adjusting range 0 ... -12 dB 0 ... -12 dB
Slope correction range 0 ... -15 dB 0 ... -15 dB
Noise figure < 7,5 dB < 7 dB
Mains power supply V~ 100 ... 240 V / 47 - 63 Hz 15 ... 20 V / 210 mA
Power consumption < 4 W -
Ambient temperature -20 ... +50 °C -20 ... +50 °C
Dimensions (mm) 194 x 86 x 52 138 x 83 x 52
MATV and Home Distribution Amplifiers
HNV 30 UPE, HNF 30 URP
30 dB
20 dB
0 ... -12 dB
0 ... -15 dB
• For MATV and CATV systems
• Protection class IP 20
• Remote powering on input and output side (only HNF 30 URP)
Forward gain:
30 or 20 dB
Integrated attenuator and
slope control
Optional:
Universal AC Adapter
SNG 18/1000 (Art. No.: 832114)
in combination with Line Power
Injection Filter FSW 30 F (Art.
No.: 815018)
Tech-Hint HNF 30 URP
The remote power is available on the input- and output
side. This has the advantage that another remote po-
wered amplifier can be supplied with voltage. On ports
where it is not desired, a DCF 500 (set of 2 pcs. Art.No.:
871506) must be used.
Energy Saving
Switch-Mode Power Supply
Energy
Saver!