Datasheet

38
www.spaun.com
SAT IF
SAT IF
synchronous
-10dB
LeveladjusterforeachIFinput
toadjustdifferentinputlevels
SAT
For 8 subscribers.
SAT IF:
• SATIFamplifierswithprecompensating6dBslope
• IFselectionlogic:
Using the analogue control signals 14 / 18 V, 0 /
 22kHzandToneBurstortheDiSEqCcommands 
Polarity, Band and Position
• Themultiswitchessupportastandbymode.The
 SATIFamplifiersandtheLNBremotevoltageare
only active when at least one receiver feeds a remote
voltage to its multiswitch outlet
• ThemultiswitchessupportDiSEqC2.0.Thatmeans
bidirectional communication between receiver and
multiswitch is possible
Terrestrial:
• Terrestrialinputselectableactive/passive
• Returnpathfortheuseofinteractivesignals
(Triple Play)
Miscellaneous:
• Standbyfunction
• Groundclamp
Premium-Class
Cascadable Multiswitch 9 in 8
SMS 9982 NFI
LNBsupplyvoltageselectable
forQuattroorQUAD-LNB
12 V22kHz
18 V
Terr.
-15 dB
passive
0 dB
Thisadjusterallowsthereduc-
tion of the terrestrial signal and
the extension of the return path
9 DC-decoupled terminating resistors are
shipped with the SMS 99X2 NF to terminate
the trunk lines.
ZFR 75 DC /Set (Art.No.: 871511)
Standby Function and
Switch-Mode Power Supply
Energy
Saver!