User manual
Ultra Slim HDMI Switch Aluminum
Item no. 1416401 (3x1)
Item no. 1416402 (5x1)
Version 03/16
Intended use
The product features 3 or 5 HDMI inputs and one HDMI output. Select the input signal via the
button on the product or use the included IR remote control. Power is supplied via the included
power adapter. The IR remote control is powered by one button cell battery, type CR2032.
It is intended for indoor use only. Do not use it outdoors. Contact with moisture, e.g. in
bathrooms, must be avoided under all circumstances.
For safety and approval purposes (CE), you must not rebuild and/or modify this product. If you
use the product for purposes other than those described above, the product may be damaged.
Inaddition,improperusecancausehazardssuchasshortcircuiting,re,electricshocketc.
Read the instructions carefully and keep them. Make this product available to third parties only
together with its operating instructions.
This product complies with the statutory national and European requirements. All company
names and product names are trademarks of their respective owners. All rights reserved.
HDMI® is a registered trademark of HDMI Licensing L.L.C.
Delivery content
• HDMI switch
• Power adapter (5 V / 2 A)
• Remote control (incl. CR2032 battery)
• 4x rubber feet
• Operating instructions
Up-to-date Operating Instructions:
1. Open www.conrad.com/downloads in a browser or scan the displayed
QR code.
2. Select document type and language and enter the item number
intothesearcheld.After submitting thequeryyoucandownload
displayed records.
Safety instructions
Read the operating instructions carefully and especially observe the safety
information. If you do not follow the safety instructions and information
on proper handling in this manual, we assume no liability for any resulting
personal injury or damage to property. Such cases will invalidate the
warranty/guarantee.
a) Persons / Product
• The device is not a toy. Keep it out of the reach of children and pets.
• Do not leave packaging material lying around carelessly. These may become dangerous
playing material for children.
• Protect the product from extreme temperatures, direct sunlight, strong jolts, high humidity,
moisture,ammablegases,vapoursandsolvents.
• Do not place the product under any mechanical stress.
• If it is no longer possible to operate the product safely, take it out of operation and protect it
from any accidental use. Safe operation can no longer be guaranteed if the product:
- is visibly damaged,
- is no longer working properly,
- has been stored for extended periods in poor ambient conditions or
- has been subjected to any serious transport-related stresses.
• Please handle the product carefully. Jolts, impacts or a fall even from a low height can
damage the product.
• Also observe the safety and operating instructions of any other devices which are connected
to the product.
• The mains outlet must be located near to the device and be easily accessible.
• Only use the supplied mains adapter as a power supply.
• Only connect the power adapter to a normal mains socket connected to the public supply.
Before plugging in the power adapter, check whether the voltage stated on the power adapter
complies with the voltage of your electricity supplier.
• Never connect or disconnect power adapters if your hands are wet.
• Neverunplugthepoweradapterfromthemainssocketbypullingonthecable;alwaysuse
the grips on the plug.
• When setting up the product, make sure that the cable is not pinched, kinked or damaged
by sharp edges.
• Always lay the cables so that nobody can trip over or become entangled in them. This poses
a risk of injury.
• For safety reasons, disconnect the power adapter from the mains socket during storms.
• If the power adapter is visibly damaged, do not touch it. Risk of fatal injury due to electric
shock! First turn off the power supply to the power outlet that the power adapter is connected
to(ipoffthefuseandthenturnofftheresidualcurrentoperatedcircuitbreakertodisconnect
the power outlet at all phases). Now unplug the device from the power outlet. Dispose of
the power adapter in an environmentally friendly fashion, discontinue use of it immediately.
Replace it with an identical power adapter.
• Never use the product immediately after it has been brought from a cold room into a warm
one. The condensation generated could destroy the product. The plug-in power supply unit
also involves danger to life by electric shock! Allow the device to reach room temperature
before connecting and using it. This may take several hours.
• Neverpourliquidsoverelectricdevicesandneverplaceliquid-lledobjectsnearthedevice.
Ifliquid or an object entersthe interior of the devicenevertheless, rst power down the
respective socket (e.g. switch off circuit breaker) and then pull the mains plug from the mains
socket. Do not operate the product anymore afterwards, but take it to a specialist workshop.
b) Battery
• Please ensure the correct polarity when inserting the battery.
• The battery should be removed from the device if it is not used for a long period of time to
avoid damage through leaking. Leaking or damaged batteries might cause acid burns when
in contact with skin, Therefore use suitable protective gloves to handle corrupted batteries.
• Batteries must be kept out of reach of children. Do not leave batteries lying around, as there
is risk, that children or pets swallow them.
• Donotdisassemble,short-circuitorthrowbatteriesintore.Neverrechargenon-rechargeable
batteries. There is a risk of explosion!
c) Miscellaneous
• Consult an expert when in doubt about operation, safety or connection of the device.
• Maintenance,modicationsandrepairsaretobeperformedexclusivelybyanexpertorat
aqualiedshop.
• If you have questions which remain unanswered by these operating instructions, contact our
technical support service or other technical personnel.