User manual

ManualsBrandsSPEAKA PROFESSIONAL ManualsTV AccessoryStorage box Compatible with (series): Universal Black

Image 1: Installation to a VESA slot

• Attach the product to an available VESA slot on the rear panel of the TV using a washer (J or K

depending on the screw) and one screw (F, G, H, or I depending on screw thread). The padded

side must face forward. Use a suitable Phillips screwdriver.

Image 2: Installation to ventilation slots

• Attach two similar hooks (D or E depending on the width of the ventilation slots) by their curved

end to the ventilations slots of the TV.

• Place the storage box till the very end onto the straight and longer end of the hooks.

Image 3: Installation to massive/wooden walls

Purchase special dowels and screws deepening on the wall structure, e.g. concrete.

Contact a professional before installation in case of doubt.

Select the installation location carefully, in order for the storage box to be at the desired

position.

When drilling installation holes or tightening screws, make sure not to damage any

existing cables or pipes (e.g. water pipes).

• Select the position at the installation location. Mark the required drill holes onto the installation

surface. To do so, use the storage box (A) as a template.

• Drill the required boreholes.

• In case of massive walls, insert dowels (M) into the drill holes.

• Attach the storage box to massive walls using two screws (L). Use suitable screws (not

included) for attaching the product to wooden walls. The padded side must face forward.

Image 4: Installation to a TV mount

Depending on the weight and size of your TV, ask another person for help.

• If your TV is already installed to a TV mount, loosen the screws and remove the TV from the

TV mount.

• Position the spacers (C) between the TV mount and the upper half of the TV’s rear panel. Attach

them using a suitable screw.

• Carefully slide the storage box between the TV mount and the lower half of the TV’s rear panel.

Attach the storage box using a suitable screw (F, G, H, or I depending on screw thread) and a

washer (J or K depending on the screw) to the TV mount.

You may install the storage box both vertically or horizontally to the TV mount.

Image 5: Direct installation to the rear panel of the TV

• Clean the surface. The installation surface must be free from dust, dirt, moisture, and grease.

• Remove the protective lms from the two adhesive strips on the rear of the storage box and

then press the box securely against the surface.

Removing the storage box can cause adhesive residues or damage to the surface.

Carefully select the installation location.

The adhesive strips are not suitable for installation to painted walls.

Operation

• Place your TV accessory on the padded side of the storage box and attach it on both sides

using the rubber band (B). To do so, hook up the rubber band two times on each side.

You may attach the rubber band both horizontally or vertically to the storage box. Make

sure the TV accessory is securely positioned inside the box and cannot slide out from

the box.

Make sure the small metal part of the rubber band is always located on the rear side of

the storage box in order to avoid scratching on the TV accessory.

Cleaning and care

• Never use aggressive cleaning agents, rubbing alcohol or other chemical solutions, as those

could damage the surfaces.

• Clean the product with a dry, bre-free cloth.

Technical data

Load capacity .....................................max.1 kg

Suitable TV accessories .....................max. device height 40 mm

max. device width 110 mm with rubber band

Operating/storage conditions ..............-30 to -60 °C, 1 - 80 % RH

Dimensions (W x H x D) .....................103.5 x 9.5 x 135.5 mm

Weight ................................................approx. 40 g

Operating instructions

Storage Box

Item no. 1420059

The product is intended for storing TV accessories such as converters, TV boxes, etc.,

conveniently behind a TV. The storage box can be connected to a VESA slot on the rear panel of

the TV, to the ventilation slots of the TV, to a TV wall mount, or to the wall. The storage box can

also be attached directly to the TV’s rear panel using adhesive strips.

The product is intended for use in dry indoor spaces.

If you use the product for purposes other than those described above, the product may be

damaged. Read the operating and assembly instructions thoroughly and keep them for future

reference. Always include the instructions when handing over the product to third parties.

The product corresponds to the legal, national and European requirements. All company names

Delivery content

• Single components and installation material

(see accompanying assembly instructions)

• Assembly instructions

• Operating instructions

Up-to-date operating instructions

Download the latest operating instructions from our website www.conrad.com/downloads or scan

the printed QR code. Follow the instructions on the website.

Safety instructions

Read the operating instructions carefully and especially observe the safety

information. If you do not follow the safety instructions and information on

proper handling in these operating instructions, we assume no liability for any

resulting personal injury or damage to property. Such cases will invalidate the

warranty/guarantee.

• The product is not a toy. Keep it out of the reach of children and pets.

• Do not leave packaging material lying around carelessly. These may become

dangerous playing material for children.

• Protect the product from extreme temperatures, direct sunlight, strong jolts, high

humidity, moisture, ammable gases, vapors and solvents.

• Do not place the product under any mechanical stress.

• Please handle the product carefully. Jolts, impacts or a fall even from a low height

can damage the product.

• Observe the safety and operating instructions of all other devices connected to the

product.

• Verify that the shipment is complete before assembling the product. Do not assemble

the product if the shipment is not complete.

• Assembling the product in an unsuitable location can lead to property damage and

personal injury!

• Only carry out the steps required for assembly. Never attempt to modify or repair the

product. Do not make any modications.

• Work on a clean, soft and dry surface. Protect valuable furniture surfaces with a

suitable pad when assembling the product.

• Do not over-tighten the screws. Over-tightening the screws may cause damage to

the threading and can impair the strength of screw connections.

• Check all screw connections from time to time. The screw connections can become

loose over time due to movement.

• Guide the mains cable of the TV accessory in such a way that it does not pose any

risk of tripping over or entanglement. This poses a risk of injury.

• Do not overload the storage box. Observe the “Technical data”.

• In case of doubt, do not install the product yourself; have a professional do it for you.

• Consult an expert when in doubt about operation, safety or connection of the

product.

Installation

Keep your own safety in mind when handling power tools (e.g. power drill). Observe all

other safety instructions in the corresponding instructions.

Please also refer to the pictures provided in the accompanying assembly instructions.

This is a publication by Conrad Electronic SE, Klaus-Conrad-Str. 1, D-92240 Hirschau (www.conrad.com).

All rights including translation reserved. Reproduction by any method, e.g. photocopy, microlming, or the capture in

electronic data processing systems require the prior written approval by the editor. Reprinting, also in part, is prohibited.

This publication represents the technical status at the time of printing.