Manual

2
Safety Instructions
SP-TVC-600 Rolling TV Cart
Item no: 2611688
1 Intended use
The product is a TV cart. A suitable TV (or other monitor) can be mounted to the cart.
The product is intended for indoor use only. Do not use it outdoors.
If you use the product for purposes other than those described, the product may be dam-
aged.
Improper use can result in hazards.
The product complies with the statutory national and European requirements.
For safety and approval purposes, you must not rebuild and/or modify the product.
Read the safety instructions and any accompanying instructions carefully and store them in
a safe place. Make this product available to third parties only together with the safety instruc-
tions and any accompanying instructions.
All company names and product names are trademarks of their respective owners. All rights
reserved.
2 Latest product information
Download the latest product information at www.conrad.com/downloads or scan the QR
code shown. Follow the instructions on the website.
3 Description of symbols
The following symbols are on the product/appliance or are used in the text:
The symbol warns of hazards that can lead to personal injury.
This symbol warns of objects that can fall over and cause serious personal injury
or death.
4 Safety instructions
Read this document and the accompanying operating instructions carefully
and especially observe the safety information. If you do not follow the
safety instructions and information on proper handling, we assume no liab-
ility for any resulting personal injury or damage to property. Such cases
will invalidate the warranty/guarantee.
4.1 General
■
The product is not a toy. Keep it out of the reach of children and pets.
■
Do not leave packaging material lying around carelessly. This may become dangerous
playing material for children.
■
If you have questions which remain unanswered by this information product, contact our
technical support service or other technical personnel.
■
Maintenance, modifications and repairs must only be completed by a technician or an
authorised repair centre.
4.2 Sharp edges
■
Edges of the product can be sharp and cause cuts if touched or rubbed against. Handle
sharp edges very carefully. If necessary, wear protective gloves.
4.3 Before assembly and installation
■
The monitor must have a suitable mounting device (example: VESA mount). An improp-
erly mounted monitor can fall down and cause injury. Ensure the monitor is suitable be-
fore you mount it. Check the instructions that came with the monitor.
4.4 Assembly and installation
■
The monitor is heavy. Lifting heavy weights can cause injury. Install the product together
with another person.
■
Route cables in such a way that they cannot get jammed, bent, or tripped over.
■
Over-tightening the screws may cause damage to the threading and can impair the
strength of screw connections. Do not over-tighten the screws.
4.5 Do not misuse
■
Do not sit, stand, hang onto, or support yourself on the product. The product can col-
lapse or fall over and cause injury.
■
Do not hang objects onto the product. The product can collapse or fall over and cause in-
jury.
4.6 Do not overload
■
The product can collapse if overloaded and cause serious personal injury. Observe the
maximum payload given in the product specifications.
4.7 Use
■
Jerky adjustment or movement can make the product tip over and cause injury or
product damage. Adjust and move the product carefully.
■
Tighten brakes (if available) after moving in place.
4.8 Maintenance
■
Adjusting and moving the product can cause the screw connections to get loose over
time. Components can fall down or fall off and cause injury. Check all screw connections
from time to time.
5 Technical data
Payload (max.) .............................. 100 kg (Monitor)
5 kg (Tray)
Monitor size .................................... 152.4 cm (60") - 254 cm (100")
Caster with brake............................ Yes
Weight (approx.) ............................ 40 kg
This is a publication by Conrad Electronic SE, Klaus-Conrad-Str. 1, D-92240 Hirschau (www.conrad.com).
All rights including translation reserved. Reproduction by any method (e.g. photocopying, microfilming or the capture in
electronic data processing systems) requires prior written approval from the editor. Reprinting, also in part, is prohibited.
This publication reflects the technical status at the time of printing.
Copyright by Conrad Electronic SE.
*2611688_V1_0822_jh_ss_en 615973259-2 I1/O1 en