PRINTING INSTRUCTIONS: AIM LCR3 MANUAL - INK: BLACK - MATERIAL: 80lb Gloss - SIZE: 8.500” x 11.
PRINTING INSTRUCTIONS: AIM LCR3 MANUAL - INK: BLACK - MATERIAL: 80lb Gloss - SIZE: 8.500” x 11.000” INTRODUCTION Congratulations on your purchase of SpeakerCraft’s AIM LCR3 Home Cinema Speakers. The AIM LCR3s have been timbre matched to SpeakerCraft’s AIM8 , AIM7, MT and CRS Speakers, providing an outstanding home theater experience. FIGURE 1 SPEAKER PLACEMENT AIM LCR3 speakers can be used in any position of a home theater speaker system.
PRINTING INSTRUCTIONS: AIM LCR3 MANUAL - INK: BLACK - MATERIAL: 80lb Gloss - SIZE: 8.500” x 11.000” determined there aren’t any obstructions in your desired mounting location, start cutting the finished hole at a 90º angle to the wall surface. FIGURE 5 5. Add insulation. If the area in the wall is not already insulated, add an adequate amount of insulation material to fill the wall cavity. If the insulation material used is faced with foil or paper, position the foil or paper away from the speaker.
