OWNER’S MANUAL AccuFit DT7 In-Ceiling Loudspeaker AccuFit DT7 Three | AccuFit DT7 One
INTRODUCTION Congratulations on purchasing SpeakerCraft’s AccuFit DT7 Series of architectural loudspeakers. The AccuFit DT7 Series features a shallow 2 3⁄4" sealed steel enclosure. Speakercraft offers the AccuFit Series to address space limitations, building codes, sound transfer to adjoining walls and living environment concerns.
SPEAKER INSTALLATION The unique integral four foot mounting system incorporated into your AccuFit DT7 speaker allows for a quick installation by following these easy steps. Diagram 2 1. Remove the grille. It may be necessary to push one or two of the mounting screws, and its attached foot, towards the baffle and against the inside surface of the grille to force the grille out of its retaining groove. 2.
SPECIFICATIONS AccuFit DT7 Three AccuFit DT7 One Speaker Type: Two tweeters mounted onto a dual voice coil, shallow-depth, sealed steel enclosure Two tweeters mounted onto a dual voice coil, shallow-depth, sealed steel enclosure Tweeters: (2) 3⁄4" Aluminum Dome Tweeters (2) 3⁄4" Resin coated Silk Dome Tweeters Woofer: 7" Aluminum Cone Woofer with Dual Voice Coil 7" Polypropylene Cone Woofer with Dual Voice Coil Impedance: 8 ohms 8 ohms Sensitivity: 92dB 1W/1m 91dB 1W/1m Frequency Adjustment
