OWNER’S MANUAL AccuFit IW7 In-Wall Loudspeaker AccuFit IW7 Three | AccuFit IW7 One
INTRODUCTION Congratulations on purchasing SpeakerCraft’s AccuFit IW7 Series of architectural loudspeakers. The AccuFit IW7 Series features sa shallow 2 3⁄4" sealed steel enclosure. Speakercraft offers the AccuFit Series to address space limitations, building codes, sound transfer to adjoining walls and living environment concerns.
SPEAKER INSTALLATION The unique integral six foot mounting system incorporated into each AccuFit IW7 speaker allows for a quick installation by following these easy steps: 1. Remove the grille. It may be necessary to push one or two of the mounting screws and its attached foot towards the baffle and against the inside surface of the grille to force the grille out of its retaining groove. 2.
SPECIFICATIONS AccuFit IW7 Three AccuFit IW7 One Speaker Type: 2 Way with a Shallow-Depth, fully sealed Steel Enclosure 2 Way Shallow-Depth, fully sealed Steel Enclosure Tweeter: Pivoting 1" Aluminum Dome Tweeter Pivoting 1" Resin coated Silk Dome Tweeter Woofer: 7" Aluminum Cone Woofer 7" Polypropylene Cone Woofer Impedance: 8 ohms 8 ohms Sensitivity: 91dB 1W/1m 90dB 1W/1m Frequency Adjustments: Front-Mounted Treble Switch allows the Treble to be set at one of 3 positions: –3dB, Flat, +3d
