Instructions / Assembly

From above the sink, place decorative flange ,
then screw escutcheon onto end body valve
assemblies and hand tighten. Slip trim sleeves
onto spindles. Position handles , lock washers
(SC-3004 series) and use screws to secure to
spindles. Position index buttons on handles
(blue on right handle, red on left handle) and
press into place.
Assemble gooseneck to flange assembly by wrench
tightening gooseneck collar nut . NOTE: For rigid
gooseneck, place locking washer from hardware
bag group into flange outlet before assembling
gooseneck.
LAVATORY ROUGH IN
1
1
2
"
38mm
1
3
8
"
35mm
2"
51mm
MIN. TO WALL
2"
51mm
MIN. TO LEDGE
Turn on water supplies and flush both HOT and
COLD cartridges for one minute, while checking
for leaks. Once completed, install aerator into
spout end using supplied aerator wrench.
NOTE: If installing SC-3004-FC-LD, this model does not
use an aerator.
REPAIR PART GROUPS
SC-3004
SERIES
⑮
⑯
ITEM PART NUMBER DESCRIPTION
1 RPG20-2011-CA END BODY ASSEMBLY (RED) W/ MOUNTING HARDWARE & HOSE ADAPTER
2 RPG20-2012-CA END BODY ASSEMBLY (BLUE) W/ MOUNTING HARDWARE & HOSE ADAPTER
3 RPG05-0534-CA PERFECT VALVE GROUP (RED) WITH TRIM SLEEVE & SCREW
4 RPG05-0535-CA PERFECT VALVE GROUP (BLUE) WITH TRIM SLEEVE & SCREW
5 RPG10-0070-PC TRIM COLLAR & FLANGE GROUP
6 RPG04-0320-PC METAL LEVER HANDLE GROUP
7 RPG04-0316-PC 4" WRIST BLADE HANDLE GROUP
8 RPG41-0285 RED,BLUE, & CHROME INDEXES WITH SCREWS & LOCK WASHERS
9 G18-0217-CA 8" GOOSENECK ASSEMBLY (INCLUDING O-RING)
10 RPG18-0213-CA 5" GOOSENECK ASSEMBLY (INCLUDING O-RING)
11 RPG18-0212-CA 5" FC GOOSENECK ASSEMBLY (INCLUDING O-RING)
12 RPG05-0837-PC 1.5 GPM (5.7 L/min) AERATOR ASSEMBLY WITH WRENCH
13 RPG38-0128-PC BOCA FLOW OUTLET ASSEMBLY WITH WRENCH
14 RPG05-0851-PC 1.5 GPM (5.7 L/min) LAMINAR FLOW OUTLET ASSEMBLY WITH WRENCH
15 RPG05-40005 1.2 GPM (4.5 L/min) AERATOR ASSEMBLY WITH WRENCH
1.2 GPM (4.5 L/min) LAMINAR FLOW OUTLET ASSEMBLY WITH WRENCH16 RPG05-40015