Installation

ManualsBrandsSpeakman ManualsPlumbingEyesaver Collection 2.8 GPM Deck Mounted Widespread Eyewash Faucet

SPEAKMAN

400 Anchor Mill Rd. New Castle, DE 19720 Phone: 800-537-2107 Fax: 800-977-2747

10/31/18 speakman.com 92-SEF-1800-16

SPEAKMAN

SEF-1800-CA, SEF-1800-CA-TW,

SEF-1800-CA-8, SEF-1800-CA-8-TW

Installation, Maintenance & Operation Instructions

EYESAVER® FAUCET

DESCRIPTION

The SEF-1800-CA Eyesaver

faucet combines a gooseneck faucet with independently operated

eyewash. The faucet features ¼ turn Speakman Ceramic Perfect

Valves while the eyewash offers twin

aerated sprays and flip-top dust covers.

SPECIFICATIONS

INLET SUPPLY: 3/8” COMPRESSION WITH MALE THREADS.

OPERATION: EYEWASH AND FAUCET OPERATE INDEPENDENTLY OF EACH OTHER.

SUPPLY: ½” MALE CONNECTIONS FOR HOT AND COLD INLETS.

WIDESPREAD VALVES: PERFECT® VALVES WITH 1/4 TURN CERAMIC CARTRIDGES COVERED

BY A 25 YEAR WARRANTY.

FINISH: CHROME PLATED BRASS.

FAUCET HANDLES: VANDAL-RESISTANT 4” WRIST HANDLES WITH COLOR-CODED INDEXES.

EYEWASH ACTIVATION: PULL HANDLE WITH GRAPHICS.

EYEWASH SPRAYS: AERATED SPRAYS.

FAUCET FLOW RATE: AUTOFLO® DEVICE CONTROLS FLOW TO 1.5 GPM/ 5.7 LPM.

EYEWASH FLOW RATE: 2.8 GPM AT 30 PSI. FLOWING. SEE FLOW DATA CHART FOR

ADDITIONAL INFORMATION.

COUNTER THICKNESS: UP TO 2” THICK.

CENTER DISTANCE: ADJUSTABLE CENTERS OF 6” TO 12”.

PRESSURE: 30 PSI. MINIMUM FLOW PRESSURE, 125 PSI. MAXIMUM STATIC PRESSURE.

APPROVALS: MEETS ASME A112.18.1, ANSI Z358.1 AND CSA B125.1.

VACUUM BREAKER (ST OPTION): APPROVED BY ASSE, UPC AND CSA. MEETS THE ANSI/ASSE 1035

STANDARD FOR “LABORATORY FAUCET VACUUM BREAKERS”,

CSA B64.8 AND UPC.

SHIPPING WEIGHT: 10 LBS.

Summary of content (8 pages)

PAGE 1
SPEAKMAN ® SEF-1800-CA, SEF-1800-CA-TW, SEF-1800-CA-8, SEF-1800-CA-8-TW Installation, Maintenance & Operation Instructions EYESAVER® FAUCET DESCRIPTION The SEF-1800-CA Eyesaver® faucet combines a gooseneck faucet with independently operated eyewash. The faucet features ¼ turn Speakman Ceramic Perfect® Valves while the eyewash offers twin aerated sprays and flip-top dust covers. SPECIFICATIONS INLET SUPPLY: 3/8” COMPRESSION WITH MALE THREADS.
PAGE 2
SEF-1800-CA ROUGH-IN IMPORTANT: The supply line for plumbed units shall provide an uninterruptible supply of flushing fluid at a minimum of 30 psi. of flow pressure. If shut off valve are installed in the supply line of the eyewash for maintenance purposes, provisions shall be made to prevent unauthorized shut off. SPEAKMAN ® 400 Anchor Mill Rd. New Castle, DE 19720 Phone: 800-537-2107 Fax: 800-977-2747 10/31/18 speakman.
PAGE 3
SEF-1800-CA-TW ROUGH-IN IMPORTANT: The supply line for plumbed units shall provide an uninterruptible supply of flushing fluid at a minimum of 30 psi. of flow pressure. If shut off valve are installed in the supply line of the eyewash for maintenance purposes, provisions shall be made to prevent unauthorized shut off. SPEAKMAN ® 400 Anchor Mill Rd. New Castle, DE 19720 Phone: 800-537-2107 Fax: 800-977-2747 10/31/18 speakman.
PAGE 4
FLOW DATA: SEF-1800-CA Spray Plume Length and Flow Flowing Pressure Flow Rate Eyewash Distance Plume "A" 30 psi 2.07 Bar 2.8 gpm 10.6 L/min 13.5" 34.29 cm 40 psi 2.76 Bar 3.1 gpm 11.7 L/min 14.25" 36.2 cm 50 psi 3.45 Bar 3.1 gpm 11.7 L/min 14.25" 36.2 cm 60 psi 4.14 Bar 2.9 gpm 11.0 L/min 13.75" 34.93 cm 70 psi 4.83 Bar 2.9 gpm 11.0 L/min 13.75" 34.93 cm 80 psi 5.52 Bar 3.0 gpm 11.4 L/min 13.75" 34.
PAGE 5
PACKING LIST Item Description Qty. Item Description Qty. 1 Valve Body Assembly, Hot side 1 7 Tee Assembly 1 1b Valve Body Assembly, Cold side 1 8 1 2 Trim Package 2 9 3 Handle Package 2 10 4 Gooseneck Assembly 1 11 5 Washer Bag Group 1 12 Aerator Handle package for – 6WH option, (replaces item 3) Serrated Tip and Vacuum Breaker for –ST option, (replaces item 8) .
PAGE 6
INSTALLATION Step 1: Valve Body Mounting - The valve bodies are marked with red marker for the hot supply and blue marker for the cold supply. a. b. c. Screw locknuts down onto the valve body assemblies. Place the cup washers onto valve bodies. Working from below the sink, insert the valve body assemblies through holes in sink or countertop. From above sink, place rubber washers onto the valve bodies. d.
PAGE 7
Step 4: Trim Package a. b. From above sink, place the trim flange over the valve spindles. Screw trim collar onto the valve body and tighten. The flange should be secure at this point. If not, back off the flange nut that was assembled in step 1 and reassemble the trim. c. Slip sleeves onto valve spindles. d. Position the handles and secure using the lock washer and screw. e. Position the red index button on the handle for the hot water valve and press into place.
PAGE 8
*ADJUSTING THE TEPID WATER SUPPLY TEMPERATURE: ANSI Z358.1-1998 requires that the delivered flushing fluid temperature shall be tepid. Also, in circumstances where chemical reaction is accelerated by flushing fluid temperature, a medical advisor should be consulted for the optimum temperature of each application. IMPORTANT: The supply line for plumbed eyewash units shall provide an uninterruptible supply of flushing fluid at a minimum of 30 psi. of flow pressure.