Installation Guide

SF-9100 / SF-9200 REPAIR PARTS
SPEAKMAN
®
ITEM NO. PART NO. DESCRIPTION
RPG76-107259 TRANSFORMER 120VAC TO 6VDC
RPG45-110196 MOUNTING HARDWARE GROUP
RPG76-108060 SOLENOID ASSEMBLY (NO BATTERY)
RPG05-108059 0.5 GPM AERATOR REPAIR KIT
NOTES:
COMPLIANCE:
CONNECTIONS:
ASME A112.18.1/CSA B 125.1
Supply Connection:
9/16"-24 UNF Connection
FLOW DATA:
• 0.5gpm (1.9 L/min)
1"
25mm
2
1
4
"
57mm
1
3
4
"
44mm
1
7
8
"
48mm
4
3
4
"
122mm
11
1
4
"
285mm
DECK THICKNESS
ACCOMODATES
3
1
4
"
82mm
4
1
4
"
107mm
8"
204mm
1
1
8
"
29mm
5
7
8
"
148mm
24" SOLENOID
HOSE
FAUCET FITS
HOLE
2"
MIN. TO LEDGE
51mm
2"
MIN. TO WALL
51mm
LAVATORY ROUGH-IN
29mm
1
1
8
"
MIN
SF-9100 / SF-9200 ROUGH-IN DIAGRAM
SPEAKMAN
®
ALL DIMENSIONS ARE IN INCHES (MILLIMETERS) UNLESS
OTHERWISE SPECIFIED. DIMENSIONS SUBJECT TO
CHANGE WITHOUT NOTICE.
SF-9100 / SF-9200 CARE AND CLEANING
1) Your SENSORFLO
®
Faucet is designed and engineered in accordance with the highest
quality and performance standards. With proper care, it will provide years of hygienic
and trouble-free service.
2) Periodically, the Faucet will require some minor maintenance to keep it at peak
performance. There are 2 low battery indicator lights. One located on the Sensor on the
Faucet body and the other located on the Solenoid Box. When the low battery light on the
Sensor blinks, it indicates that the battery is low. However, the Solenoid can still function
at this point. When the low battery light on the Solenoid blinks, the Solenoid will stop
functioning at this point and the batteries need to be replaced immediately. To replace the
batteries, follow the installation instructions in the electrical connections section of this
document.
3) The polished chrome finish of your Faucet should be cleaned using mild soap and
warm water.
4) Dry immediately with a soft, clean cloth for best results.
5) NEVER use abrasive cleaners, chemicals, alcohol or other solvents. They may damage
the surfaces of the non-chrome plated finishes.