Installation

Page 5 of 15
SPEAKMAN
®
400 Anchor Mill Rd. New Castle, DE 19720 Phone: [phone] Fax: [phone]
1/15/16 www.speakman.com 92-S-9100-9200-05
Install 3/8”compression fitting hoses to the UCM (under
counter mixing valve). The hot and cold sides are
marked H and C. Hand tighten connections and then
slightly tighten with an adjustable wrench.
DRY CONNECTION ONLY.
NOTE: During winter month it may be necessary to
reverse Hot and Cold connections to obtain warmer
temperature range of water.
After connecting to supply lines, turn on the water and
activate the faucet with your hands, checking for leaks.
Adjust water temperature by rotating the screw on the
UCM to your required temperature.
MAINTENANCE
Your SENSORFLO faucet is designed and engineered in accordance with the highest quality and
performance standards. With proper care it will provide years of trouble free service. Periodically the faucet
will require some minor maintenance to keep it performing at peak performance. Periodically check the
solenoid filter for debris. If debris is present clean the filter toughly. The polished chrome finish of your faucet
should be cleaned using mild soap and warm water. Dry immediately with a soft, clean cloth for best results.
REPLACEMENT OF SENSOR MODULE
If the Faucet is mounted onto Deck, first take it out
with proper care to not damage the connectors and
the wires. Take out the Gasket from under Base of
Faucet. Take the screw completely out of the back of
faucet.