Installation

Page 9 of 15
SPEAKMAN
®
400 Anchor Mill Rd. New Castle, DE 19720 Phone: [phone] Fax: [phone]
1/15/16 www.speakman.com 92-S-9100-9200-05
MO (MANUAL OVERRIDE) INSTALLATION
1. Thread a Thin Nut onto the Faucet Shank. .
2. Insert Mount bracket over Faucet Shank. Secure into position with the Solenoid Nut. (dry connection only)
3. Lower the Thin Nut onto bracket
4. Slip compression spring onto MO spindle
5. With O-Ring attached to the Spacer, slip Spacer and Bearing Sleeve onto spindle
6. With the lock washer and screw inside the Handle, properly position Handle onto Spindle.
7. Push Handle down onto Spindle to compress the spring and tighten the screw.
8. Snap Index Button into Handle
9. The water supply splits into Tee, and one exit hose goes to Solenoid and the other hose goes to bottom of
Manual Override
10. Connect a by-pass hose between the side outlet port of the Manual Override unit to the Upper-Side port of
the Solenoid Assembly.
NOTE: Use a Tee to branch the water supply to both the Solenoid Assembly Inlet (Lower Port of Solenoid) and
the Manual Override Assembly Inlet (at base of Manual Override).