Installation

SPEAKMAN COMPANY
SE-597 Installation, Maintenance & Operation Instructions
DESCRIPTION
Portable body wash. Supplied with stainless steel tank, pressure gauge, air filler, pressure relief valve, and drench hose
activated by squeeze handle with non-aerated spray nozzle, and dust cover.
SPECIFICATIONS
TANK: 5 Gallon Stainless Steel.
DRENCH HOSE:
VALVE: 3/8” NPT Female Brass, Chrome-Plated.
HOSE: 6’ Reinforced, 750 PSI Burst Pressure, Hose Clip for Valve.
SPRAYHEAD: Yellow Plastic Spray Outlet w/ Flip Top Dust Cap and an Automatic Flow Control.
SHIPPING WEIGHT: 13 lb.
INSTALLATION
Failure to use potable water can result in emergency units producing impure or contaminated water causing possible further
injury. Fill tank with 4 gallons of water, and pressurize tank with 100 psi air.
OPERATION
The drench hose is activated by applying pressure to the valve handle. The self-closing valve will open and an aerated flow of
water will discharge from the outlet. Water will continue to flow as long as the handle is depressed. Once pressure on the
handle is released, the valve will immediately shut off.
TESTING PROGRAM
The American National Standards Institute (ANSI) states that all safety emergency equipment shall be activated on a weekly
basis to flush the line and verify proper operation. Speakman Company furnishes a testing record tag (91-0635) with each unit.
On this tag the date of inspection and the inspector’s initials should be noted.