Installation

2
• Assemble 1-1/4” x 29-3/8” Pipe (11)
to Drain/Supply Cross (12). Assemble
1-1/4” Tee (10) to Pipe (11).
• Assure the Side Outlet portion of Tee (10)
is facing the rear of the Unit.
Rear of Unit
Front of Unit
3
• If water supply is coming from above Unit,
install Plug (7) into side outlet of Tee (10).
• If water supply is coming from behind
Unit, install Plug (7) into top outlet of
Tee (10).
Front of Unit
For Back Supply,
install Plug
(7) here.
For Top Supply,
install Plug
(7) here.
4
• Assemble 1” x 4-1/2” Pipe (6) into Side
Outlet of Tee (8). Review View 4a below
to understand the orientation of Ball
Valve (5).
• Assemble 1” Ball Valve (5) onto Pipe (6).
Valve Stops must be aligned correctly in
order for the Pull Handle to operate
properly.
Detail View 4a
To Showerhead
Valve Stops
To Showerhead
5
• Install Pipe (2) into Ball Valve (5).
• Assemble Elbow (1) to Pipe (2) being sure
to orient Elbow (1) so that the outlet is
facing down.
• Assemble Showerhead (14) to Elbow (1).