Installation

SPEAKMAN
®
400 Anchor Mill Rd. New Castle, DE 19720 Phone: [phone] Fax: [phone]
10/31/18 www.speakman.com 92-SEF-1800-16
*ADJUSTING THE TEPID WATER SUPPLY TEMPERATURE:
ANSI Z358.1-1998 requires that the delivered flushing fluid temperature shall be tepid. Also, in circumstances
where chemical reaction is accelerated by flushing fluid temperature, a medical advisor should be consulted
for the optimum temperature of each application.
IMPORTANT: The supply line for plumbed eyewash units shall provide an uninterruptible supply of flushing
fluid at a minimum of 30 psi. of flow pressure. If shut off valve is installed in the supply line of the eyewash for
maintenance purposes, provisions shall be made to prevent unauthorized shut off.
OPERATION
Faucet - Simply rotate the handles to operate the lavatory faucet.
Eyewash - The eyewash is activated by pulling the handle out. Once the eyewash is activated, the eyewash
caps will flip off and water will come out of the aerated spray heads. The eyewash will continually discharge
water until the handle is manually pushed back into the off position.
The flow of the individual spray heads is controlled by built-in flow controls. Each spray assembly is tested
and aligned in the factory.
TESTING PROGRAM
ANSI Z358.1 requires that all emergency equipment shall be tested weekly to verify proper operation and
inspected annually to assure conformance with ANSI Z358.1 requirement.
MAINTENANCE
End body valves are washer-less and require no routine maintenance. The gleaming finish of your
SPEAKMAN Eyesaver
®
faucet can be cleaned by using mild soap and warm water. Rinse thoroughly
and dry immediately with a soft, clean cloth for best results.
REPAIR PARTS LISTING
Part or
Group Number
Description
Refer to Packing
List Figure
RPG04-0316-PC 4” wrist handle group with screw and index buttons Item 3
RPG10-0070-PC Collar and flange Item 2
RPG20-2012-CA End Body Assembly (red) with mounting hardware
Item 1
(hot supply)
RPG20-2011-CA End Body Assembly (blue) with mounting hardware
Item 1b
(cold supply)
RPG05-0534-CA Perfect valve cartridge only (red)
Perfect valve cartridge
(hot supply)
RPG05-0535-CA Perfect valve cartridge only (blue)
Perfect valve Cartridge
(cold supply)
RPG38-0388 Yellow spray head and aerator repair parts assembly Part of item 4
RPG49-0003 Repair parts for internal seals of the gooseneck eyewash Not shown
G05-0724-PC Faucet 2.2 gpm aerator Item 8
RPG04-0366 Eyewash handle with yellow text and set screw Part of item 4