Installation

ManualsBrandsSpeakman ManualsPlumbingRainier Collection Wall Mounted Tub and Shower Combination Includes Diverter Trim with 2.5 GPM Showerhead, in Polished Chrome

SPEAKMAN

Phone: 800-537-2107 Fax: 800-977-2747

12/18/18 www.speakman.com 92C-SLV-8411-01

SPEAKMAN

SLV-8411

Installation, Operation & Maintenance Instructions

RAINIER™ COLLECTION COMBINATION SERIES

DESCRIPTION

Speakman Rainier™ Collection Combination Series, SLV-8411

includes: Shower Valve Trim with integral

Volume Control Handle (CPT-8401), Shower Arm with Wall Flange (S-2550) and Multi Function Shower Head

(S-3018). This combination does not include the Shower Valve.

This combination should be installed with one of the following

Speakman Sentinel Mark II® Pressure Balance Diverter Shower Valves

CPV-PB-DV: Thermostatic Diverter Shower Valve

Sweat & Thread Connections

CPV-PB-DV-PXC: Thermostatic Diverter Shower Valve

PEX F1807 Crimp Inlet Connections

CPV-PB-DV-PXE: Thermostatic Diverter Shower Valve

PEX F1960 Cold-Expansion Inlet Connections

This combination should be installed with one of the following

Speakman Sentinel Mark II® Thermostatic Diverter Shower Valves

CPV-T-DV: Thermostatic Diverter Shower Valve

Sweat & Thread Connections

CPV-T-DV-PXC: Thermostatic Diverter Shower Valve

PEX F1807 Crimp Inlet Connections

CPV-T-DV-PXE: Thermostatic Diverter Shower Valve

PEX F1960 Cold-Expansion Inlet Connections

SPECIFICATIONS

CPT-8401 RAINIER™ COLLECTION DIVERTER SHOWER VALVE TRIM:

COMPLIANCE: ASME A112.18.1 / CSA B125.1 Standard

S-2550 RAINIER™ COLLECTION SHOWER ARM WITH WALL FLANGE:

CONNECTIONS: ½” NPT Male Inlet & Outlet

S-3018 RAINIER™ COLLECTION MULTI FUNCTION SHOWER HEAD:

CONNECTIONS: ½” NPT Female Inlet

FLOW RATE: 2.5 gpm (9.5 L/min)

COMPLIANCE: ASME A112.18.1 / CSA B125.1 Standard

INSTRUCTIONS

See individual products for installation of the components and warranty information.

Summary of content (6 pages)

PAGE 1
SPEAKMAN ® SLV-8411 Installation, Operation & Maintenance Instructions RAINIER™ COLLECTION COMBINATION SERIES DESCRIPTION Speakman Rainier™ Collection Combination Series, SLV-8411 includes: Shower Valve Trim with integral Volume Control Handle (CPT-8401), Shower Arm with Wall Flange (S-2550) and Multi Function Shower Head (S-3018). This combination does not include the Shower Valve.
PAGE 2
ROUGH-IN SPEAKMAN ® Phone: 800-537-2107 Fax: 800-977-2747 12/18/18 www.speakman.
PAGE 3
INSTRUCTIONS FOR MODELS CPT-8401-P TOOLS AND SUPPLIES Phillips Screwdriver 1 Clean wall surface. Place Mounting Base (1) onto the valve, align mounting holes, and secure with supplied screws (2). Measuring Tape IMPORTANT • Do not over-tighten any connections or damage may occur. • Be sure to read instructions thoroughly before beginning installation. • Be sure to have properly adjusted the Temperature Limiting Stop (TLS) as per the Valve Installation Instructions before installing Valve Trim.
PAGE 4
SPEAKMAN CPT-8401-P REPAIR PARTS ® ITEM NO. PART NO. DESCRIPTION RPG05-0874 SCREWS AND SPLINE ADAPTERS SPEAKMAN CPT-8401-P ROUGH-IN DIAGRAM ® A 1/2" SWEAT CONNECTION 6'-6" [2 METERS] 51" 2 140mm HOLE FOR VALVE ACCESS TO FLOOR 1" 25mm HOLE FOR SHOWER ARM 1/2" SWEAT CONNECTION 4 15 " 16 125mm 1/2" SWEAT CONNECTION 1'-9" [533mm] 2-1/2"MIN [64mm] VALVE MOUNTING IS SHOWN FOR REFERENCE ONLY.
PAGE 5
INSTRUCTIONS FOR MODELS S-2550 TOOLS AND SUPPLIES Thread Seal Tape 1 Slide Escutcheon Plate (2) over the long end of the Shower Arm (1). ROUGH IN DIMENSIONS Allen Wrench (Included) 2.52'' [64.00mm] IMPORTANT Be sure to read instructions thoroughly before beginning installation. Do not overtighten any connections or damage may occur. 2 SAFETY TIPS Apply Teflon Tape to inlet side of Shower Arm (1). Thread Shower Arm (1) into Female Pipe Fitting within the wall.
PAGE 6
INSTRUCTIONS FOR MODELS S-3018 S-3018-E2 S-3018-E175 TOOLS AND SUPPLIES Thread Seal Tape (included) 1 Apply Thread Seal Tape to the outlet side of shower arm in a clockwise direction. ROUGH IN DIMENSIONS Adjustable Wrench 45" 8 117mm IMPORTANT Be sure to read instructions thoroughly before beginning installation. Do not overtighten any connections or damage may occur. 2 51" 4 133mm Thread Shower head onto shower arm by turning it in a clockwise direction. Tighten with adjustable wrench.