Installation Guide

VS-232007
VS-233010
VS-233011
VS-233014
Apply Teflon Tape in a clockwise direction to all
threaded connections.
1
2
3
4
5
6
NOTE: Inspect Diverter to be sure Sealing
Washer is in place within Coupling Nut.
Thread Coupling Nut of Diverter onto Shower
Arm. Tighten with Adjustable Wrench.
Thread Fixed Showerhead onto front outlet of
Diverter. Tighten with Adjustable Wrench.
Thread Hose end marked “HAND SHOWER”
onto base of Handheld Shower. Hand tighten
connection.
Adjustable
Wrench
Teflon
Tape
Keep your Speakman product looking new by
cleaning it periodically with a soft cloth. Avoid
abrasive cleaners, steel wool, and harsh chemicals
as these will dull the finish and void your warranty.
Cover your drain to prevent loss of parts.
Be sure to read instructions thoroughly before
beginning installation. Do not overtighten any
connections or damage may occur.
Thread Hose end marked “VACUUM BREAKER”
onto bottom outlet of Diverter. Hand tighten
connection.
92-VS-23XXXX-R1
NOTE: Fixed
Showerhead
may differ
from shown.
Place Hand Shower into Diverter Assembly.
Phillips
Screwdriver
Helpful:
NOTE:
Showerheads
may differ
from shown.
NOTE: Fixed
Showerhead
may differ
from shown.

Summary of content (2 pages)