Instruction Manual

16 AFTER SALES SUPPORT 0345 605 2070
PREPARE
1. Settle the power cord.
2. Install correct cutting device
The power cord should be wrapped around
the cord stain relief to avoid long lines
stumbling pedestrians or causing electric
shock.Get children, pets out of working
area.
The machine is fitted with a scarifying
cylinder blade before delivery.
A. For scarifying
Correct cutting blade tted already thus no
need for extra installation.
B. For raking
You need to disassemble the scarifying
cylinder blade rstly before tting the raking
blade.
First step,disassemble the scarifying cylinder
blade:
a. Place the product upside down on a
at stable ground to have access to the
under-body.
b. Loosen the two bolts with a suitable
wrench, remove them together with
the spring washers and the presently
attached cutting device.
c. To remove the cutting device, rst lift the
bearing and then pull it out from the drive
shaft.