Instruction Manual
AFTER SALES SUPPORT 0345 605 2070 21
OPERATE
4. Raking work
Raking work is run with raking cylinder
with fine needles,you can adjust the
working depth by depth adjustment lever
accordingly. In order that a healthy lawn
can develop in the spring, it is necessary
for greater amounts of air to penetrate the
area around the roots of the grass. We
recommend aerate the lawn every 4 - 6
weeks depending on the state of your lawn.
5. Stop machine
Release the start/stop lever,machine will
stop running.press the lock-off button and
hold the Start/stop lever,restart the machine.
NOTE:Overload protection
The overload protection will be activated
the following circumstances:
1). A build up of scaried material around
cutting device.
2). If the material scaried is larger then
motor capacity.
3). Where there is too much resistance
against the cutting device.
When the circuit breaker has been activated
switch off the product and disconnect from
the power supply.
Let the product cool down and eliminate
cause before using the product again.