Instruction Manual

21 AFTER SALES SUPPORT 0345 605 2067
appliance.
(2). Move the charger and battery pack to a location
where the surrounding air temperature is
approximately 18-24°C.
(3). If charging problems persist, take or send the tool,
battery pack and charger to your local service center.
■
The battery pack should be recharged when it fails to
produce sufficient power on jobs which were easily done
previously. DO NOT CONTINUE to use under these
conditions. Follow the charging procedure. You may also
charge a partially used pack whenever you desire with no
adverse effect on the battery pack.
■
Under certain conditions, with the charger plugged in to
the power supply, the exposed charging contacts inside
the charger can be shorted by foreign material. Foreign
materials of a conductive nature such as, but no limited
to, steel wool, aluminum foil, or any buildup of metallic
particles should be kept away from charger cavities.
Always unplug the charger from the power supply when
there is no battery pack in the cavity. Unplug charger
before attempting to clean.
■
Do not immerse charger in water or any other liquid.
WARING!
Don’t allow any liquid to get inside charger. Electric
shock may result. To facilitate the cooling of the
battery pack after use, avoid placing the charger or
battery pack in a warm environment such as in a
metal shed, or an un-insulated trailer.
CAUTION!
Never attempt to open the battery pack for any
reason. If the plastic housing of the battery pack
breaks or cracks, return to a service center for
recycling; do not put it into further use.
ASSEMBLY