Instruction Manual

25 AFTER SALES SUPPORT 0345 605 2067
MAINTENANCE
This product does not contain any parts that can be repaired
by the consumer. Contact an authorised service centre or a
similarly qualified person to have it checked and repaired.
WARNING! Always switch the product off, Pull out
the battery pack and let the product cool down
before performing inspection, maintenance and
cleaning work!
■
Regular and proper cleaning will help ensure safe use and
prolong the life of the product.
■
Inspect the product before each use for worn and
damaged parts. Do not operate it if you find broken
and worn parts.
■
Lubricate the internal surfaces of the blades with
gear grease,after each use.
General cleaning
i. Switch the product off, disconnect it from the power supply
and let it cool down.
ii. Check, clean and store the product as described below.
iii. Clean the product with a damp cloth and pH-neutral soap.
Use a brush for areas that are hard to reach.
iv. In particular clean the air vents after every use with a cloth
and brush.
v. Remove stubborn dirt with high pressure air (max. 3 bar).
NOTE: Do not use chemical, alkaline, abrasive or other
aggressive detergents or disinfectants to clean this product
as they might be harmful to its surfaces.