Instruction Manual

29 AFTER SALES SUPPORT 0345 605 2067
TECHNICAL DATA
The sound values have been determined according to noise test code given in EN 69745-1,
using the basic standards EN ISO 11094 and EN ISO 3744.
The sound intensity level for the operator may exceed 80dB(A) and ear protection measures
are necessary.
That the declared vibration value has been measured in accordance with a standard test
method (according to EN 60745-1) and may be used for comparing one tool with another.
The declared vibration value may also be used in a preliminary assessment of exposure.
WARNING! The vibration emission during actual use of the power tool can differ from the
declared total value depending on the ways in which the tool is used.
Of the need to identify safety measures to protect the operator that are based on an
estimation of exposure in the actual conditions of use( taking account of all parts of the
operating cycle such as the times when the tool is switched off and when it is running idle in
addition to the trigger time).
Noise and vibration values were determined according to the standards and stipulations
mentioned in the declaration of conformity. Technical and optical changes can be carried
out in the course of further development without notice. All dimensions, references and
information of this instruction manual are therefore without guarantee. Legal claims, which are
made on the basis of the instruction manual, cannot thus be considered as valid.
Part number Accessories
CHT-13 Blade sheath
CGT-40 Safety guard
CGT-50 Charger
01704ZA Battery Pack