Instruction Manual

10
AFTER SALES SUPPORT 0345 605 2069
SAFETY INFORMATION
hedge trimmer starts making
any unusual noise or vibration,
shut off the power source and
allow the hedge trimmer to stop.
Take the following steps:
- inspect for damage;
- check for, and tighten, any loose
parts;
- have any damaged parts
replaced or repaired with parts
having equivalent specifications.
3) Operation
a) Remove battery pack before
- cleaning or when clearing a
blockage;
- checking, carrying out
maintenance or working on the
hedge trimmer;
- adjusting the working position of
the cutting device;
- leaving the hedge trimmer
unattended;
b) Ensure that the hedge
trimmer is correctly located in
a designated working position
before starting the motor.
c) While operating the hedge
trimmer, always ensure that the
operating position is safe and
secure, especially when using
steps or a ladder.
d) Do not operate the hedge
trimmer with a damaged or
excessively worn cutting device.
e) Always ensure that all handles
and guards are fitted when
using the hedge trimmer. Never
attempt to use an incomplete
hedge trimmer or one fitted with
an unauthorized modification.
f) Always use two hands to
operate a hedge trimmer fitted
with two handles.
g) Always be aware of your
surroundings and stay alert for
possible hazards of which you
may not be aware due to the
noise of the hedge trimmer.
4) Maintenance and storage
a) When the hedge trimmer is
stopped for servicing, inspection
or storage, remove battery pack
form the machine and make
sure all moving parts have come
to a stop. Allow the hedge
trimmer to cool before making
any inspections, adjustments,
etc.
b) Always allow the hedge
trimmer to cool down before
storing.
c) When transporting or storing
the hedge trimmer, always fit the
cutting device transport guard.