Instruction Manual

AFTER SALES SUPPORT 0345 605 2069

TO ASSEMBLE THE POLE (See Fig. A1-A4)

Loosen the clamp knob (5) by turning anti-clockwise. Extend the

pole to expose the two small cylinders (b). Turn the clamp knob (5)

in a clockwise direction to lock the pole to avoid movement while

assembling.

Align and insert the extended pole into the machine head (See Fig.

A2).

Tighten the sleeve (e) securely by turning clockwise.(See Fig. A3,

A4).

NOTE: Make sure that the sleeve is ﬁrmly tightened in place.

Always take care when removing the packaging to prevent damage to you

or to the pole hedge trimmer.

IMPORTANT! Before assembling the pole hedge trimmer, check all the

parts indicated in the manual are in the box. Inspect all the parts for signs

of damage. Do not assemble the pole hedge trimmer if you observe any

damaged components.

NOTE: Before using the tool, read the instruction book carefully.

Remove all parts of the pole hedge trimmer from the box and carefully

remove all packaging. Take care not to lose any instructions which may

be attached to the tool, these provide important information which will be

required while assembling the pole hedge trimmer.

Preparing To Assemble The Pole Hedge Trimmer

ASSEMBLE