Instruction Manual

19
AFTER SALES SUPPORT 0345 605 2069
OPERATION
I1
I2
I3
OPERATING THE POLE HEDGE TRIMMER (See Fig I1, I2, I3)
Always hold the trimmer with both hands and with the blade away
from you before turning it on.
When trimming new growth, use a wide sweeping action so that the
stems are fed directly into the blade.
Allow the cutting blades to reach full speed before cutting. When
operating, keep the cutting blades away from people and objects such
as walls, large stones, trees, vehicles, etc.
If the blade jam, immediately stop the trimmer. Release the switch
before attempting to clear jammed things from the cutting blades.
Do not attempt to cut stems that are too thick for the cutting blade.
WARNING!
Always remove the plug from the electrical socket before clean or repair.
1) Never use water to clean the unit.
2) Always clean the pole hedge trimmer immediately after use. Brush
the blade using a stiff nylon brush to remove any debris.
3) Always store the unit in a dry place.
4) Inspect the hedge trimmer before each use.
5) Have the unit professionally repaired if any damage occurs.
6) The blade rail should be cleaned and treated with fine lubricating oil
after each use.
7) Use the blade guard for transportation and storage.
MAINTENANCE