ORIGINAL INSTRUCTION MANUAL 36V Cordless Chainsaw S3635CC Important - Please read these instructions fully before starting assembly These instructions contain important information that will help you get the best from your chainsaw, ensuring it is assembled correctly and safely. If you need help or have damaged or missing parts, call the Customer Helpline on 0345 605 2067 AFTER SALES SUPPORT 0345 605 2067 SAN NO.
SPEAR & JACKSON SINCE 1760 For more than 250 years gardeners have enjoyed high quality performance and great results using Spear & Jackson tools. Our garden power tools combine continuous innovation and the latest in manufacturing technologies with a proud heritage. Each product is carefully designed with performance, comfort and durability firmly in mind, which has earned Spear & Jackson an enviable reputation as a maker of tools to trust.
SAFETY INFORMATION SAFETY INFORMATION Please read these instructions fully before operating or maintaining your machine Please read these instructions fully before operating or maintaining your machine DESCRIPTION OF SYMBOLS WARNING SYMBOLS ON THE CHARGER The following warning symbols appear throughout this manual and indicate the appropriate safety measures you should take when operating and maintaining the chainsaw. Please read the instruction handbook before operating this machine.
SAFETY INFORMATION SAFETY INFORMATION Please read these instructions fully before operating or maintaining your machine Please read these instructions fully before operating or maintaining your machine GENERAL SAFETY WARNING Read all safety warnings and all instructions. Failure to follow the warnings and instructions may result in electric shock, fire and/or serious injury. Save all warnings and instructions for future reference.
SAFETY INFORMATION SAFETY INFORMATION Please read these instructions fully before operating or maintaining your machine Please read these instructions fully before operating or maintaining your machine part of the power tool may result in personal injury. ■ Do not overreach. Keep proper footing and balance at all times. This enables better control of the power tool in unexpected situations ■ Dress properly. Do not wear loose clothing or jewellery.
SAFETY INFORMATION SAFETY INFORMATION Please read these instructions fully before operating or maintaining your machine Please read these instructions fully before operating or maintaining your machine If liquid contacts eyes, additionally seek medical help. Liquid ejected from the battery may cause irritation or burns. Service Have your power tool serviced by a qualified technician using only identical replacement parts. This will ensure that the safety of the power tool is maintained.
SAFETY INFORMATION SAFETY INFORMATION Please read these instructions fully before operating or maintaining your machine Please read these instructions fully before operating or maintaining your machine ■ ■ ■ ■ ■ equipment. A charger that is suitable for one type of battery pack may create a risk of fire when used with another battery pack. Do not use any battery pack which is not designed for use with the equipment. Keep battery pack out of the reach of children.
SAFETY INFORMATION SAFETY INFORMATION Please read these instructions fully before operating or maintaining your machine Please read these instructions fully before operating or maintaining your machine as they can overheat and break. ■ Longer life and better performance can be obtained if the battery pack is charged when the air temperature is between 18°C and 24°C. Do not charge the battery pack in air temperatures below 0°C, or above 45°C.
SAFETY INFORMATION SAFETY INFORMATION Please read these instructions fully before operating or maintaining your machine Please read these instructions fully before operating or maintaining your machine operations different than intended could result in a hazardous situation. CAUSES AND OPERATOR PREVENTION OF KICKBACK: Kickback may occur when the nose or tip of the guide bar touches an object, or when the wood closes in and pinches the chain saw in the cut.
SAFETY INFORMATION BOX CONTENTS Please read these instructions fully before operating or maintaining your machine INTENDED USE This cordless chainsaw (hereinafter productor “ power tool”) is designed for cutting wood only.The product is not designed for any other types of application (e. g. cutting of brickwork, plastic or food). The product is to be used by adults. Children under the age of 16 may not use the tool except under supervision.
ASSEMBLY 1 ASSEMBLY Unpacking NOTE: A new chain and bar will need readjusting after as few as 5 cuts. This is normal during the break- in period, and the interval between future adjustments will lengthen quickly. i. Unpack all parts and lay them on a flat and stable surface. ii. Remove all packing materials and shipping devices if applicable. CAUTION: If a chain is TOO LOOSE or TOO TIGHT, the bar chain and saw bearings will wear more rapidly.
ASSEMBLY 4 Installing or removing battery pack i. Hold the tool and the battery pack firmly when installing or removing the battery pack. Failure to hold the tool and the battery pack firmly may cause them to slip off your hands and result in damage to the tool and battery pack, potentially causing a personal injury. ii. Always switch off the tool before installing or removing the battery pack. iii. To remove battery pack, press the release button, and pull out.
ASSEMBLY OPERATION i. Connect the battery pack to the battery charger. STARTING THE CHAINSAW ii. Insert the mains plug into the socket. The green charging status LED light will flash. Once the battery pack is completely charged, the green charging status LED is lit continuously, indicating that the charging process is complete. Installing the battery pack iii. Disconnect the charger from the mains and remove the battery pack from the charger. iv. Attach the battery pack back to the product. i.
OPERATION OPERATION Chain Tension Attention! The battery cannot be charged immediately after use, it should be left to cool down for a period of time. The LED lights on the charger switching from green to red, meaning the battery can be charged. Switching on/off NOTE: Hold the chain saw away from yourself using both hands. Stand in a secure and stable position. i. Push the safety switch (14) forward and press the on/off switch (13) to turn the product on. 14 13 ii.
OPERATION Chain brake / hand guard OPERATION Chain brake test Before cutting with your saw, the chain brake should be tested as follows: CAUTION: A loose chain can jump off the bar while you are cutting, as well as wear the bar and chain. A chain that is too tight can damage the saw. Either way, if a chain is too loose or too tight, it could cause serious personal injury. A. Make sure the chain brake is disengaged. B. Place the saw on a firm, flat, dry surface that is clear of any debris.
OPERATION OPERATION Bucking Bucking is cutting a fallen log into lengths. Make sure you have a good footing and stand uphill of the log when cutting on sloping ground. If possible, the log should be supported so that the end to be cut off is not resting on the ground. If the log is supported at both ends and you must cut in the middle, make a downward cut halfway through the log and then make the undercut. This will prevent the log from pinching the bar and chain.
MAINTENANCE Preventative maintenance CAUTION: Place switch in OFF position and remove the battery pack before the appliance is serviced, cleaned, or maintenance is performed. 1. Keep the air intake clean and air vents free of debris to avoid overheating the motor. 2. Clean with a damp sponge and mild soap. Do not squirt with a water hose or douse with water or other liquids. 3. Inspect the saws chain for proper tension before each use and frequently during cutting. 4.
MAINTENANCE MAINTENANCE Guide bar maintenance BAR WEAR - Tum guide bar frequently at regular intervals(for example, after 8 hours of use), to ensure even wear on top and bottom of the bar. Most guide bar problems can be prevented merely by keeping the chain saw well maintained. BAR GROOVES - Bar grooves (or rails which support and carry the chain) should be cleaned if the saw has been heavity used or if the saw chain appears dirty. Rails should always be cleaned every time the saw chain is removed.
MAINTENANCE Chain Maintenance MAINTENANCE Replace the chain Direction of chain CHAIN TENSION: Check the chain tension frequently and adjust as often as necessary to keep the chain snug on the bar, but loose enough to be pulled around by hand. (See Section chainsaw TENSION ADJUSTMENT) BREAKING IN A NEW SAW CHAIN: A new chain and bar will need readjusting after as few as 5 cuts. This is normal during the breakin period, and the interval between future adjustments will begin to lengthen quickly.
MAINTENANCE CHAIN AND BAR LUBRICATION Adequate lubrication of the chain saw during cutting operations is essential to minimize friction with the guide bar. Your chain saw is equipped with an automatic oiler system. The oiler automatically delivers the proper amount of oil to the bar and chain. The oil tank level can be checked in the oil inspection window (A) provided on the right side of the saw. The tank is full when oil is at the top of the slot.
TROUBLESHOOTING TECHNICAL DATA Model No. S3635CC Problem Possible cause Solution Product does not start • Battery pack not properly attached • Battery pack discharged • Battery pack damaged • Other electrical defect to the product • Atach properly • Remove and charge the battery pack • Check by a specialist electrician • Check by a specialist electrician • Battery pack capacity too low • Air vents are blocked • Remove and charge the battery pack • Clean the air vents Net weight 3.
TECHNICAL DATA Noise emission value: Noise measurement value determined in accordance with EN 60745. The A-rated noiselevel of the power tool is typically as follows: Sound pressure level LPA: 81.9dB(A) Uncertainty k= 3 dB(A) Sound power level LWA: 92.8dB(A) Uncertainty k= 2.6 dB(A) Guaranteed sound power level LWA: 96dB(A) The vibration level varies in accordance with the use of the power tool and may be higher than the value specified in these instructions in some cases.
