ORIGINAL INSTRUCTION MANUAL 750W ELECTRIC POLE SAW S75EC2 YT4348 Important - Please read these instructions fully before starting assembly These instructions contain important information that will help you get the best from your pole saw, ensuring it is assembled correctly and safely.
SPEAR & JACKSON SINCE 1760 For more than 250 years gardeners have enjoyed high quality performance and great results using Spear & Jackson tools. Our garden power tools combine continuous innovation and the latest in manufacturing technologies with a proud heritage. Each product is carefully designed with performance,comfort and durability firmly in mind,which has earned Spear & Jackson an enviable reputation as a maker of tools to trust.
CONTENTS SAFETY INFORMATION........................................................................................................04 Description of symbols...................................................................................04 General power tool safety warnings ..............................................................05 Work area safety.............................................................................................05 Electrical safety.........................................
SAFETY INFORMATION Please read these instructions fully before operating or maintaining your machine Description of symbols Some of the following symbols may be used on your tool.Be sure to study them and learn their meaning. Proper interpretation of these symbols will allow you to use the machine more effectively and reduce the risk of accident. Indicates danger, warning or caution. WARNING – To reduce the risk of injury, user must read instruction manual. Conforms to relevant safety standards.
SAFETY INFORMATION Please read these instructions fully before operating or maintaining your machine General power tool safety warnings WARNING Read all safety warnings and all instructions. Failure to follow the warnings and instructions may result in electric shock, fire and/or serious injury. Work area safety a) Keep work area clean and well lit. Cluttered or dark areas invite accidents. b) Do not operate power tools in explosive atmospheres, such as in the presence of flammable liquids, gases or dust.
SAFETY INFORMATION Please read these instructions fully before operating or maintaining your machine tool outdoors, use an extension cord suitable for outdoor use. Use of a cord suitable for outdoor use reduces the risk of electric shock. f) The use of a residual current device (RCD) when using this tool is recommended. Use of an RCD reduces the risk of electric shock. Personal safety a) Stay alert, watch what you are doing and use common sense when operating a power tool.
SAFETY INFORMATION Please read these instructions fully before operating or maintaining your machine f) Dress properly. Do not wear loose clothing or jewellery. Keep your hair, clothing and gloves away from moving parts. Loose clothes,jewellery or long hair can be caught in moving parts. g) If devices are provided for the connection of dust extraction and collection facilities, ensure these are connected and properly used. Use of dust collection can reduce dust-related hazards.
SAFETY INFORMATION Please read these instructions fully before operating or maintaining your machine maintained power tools. f) Keep cutting tools sharp and clean. Properly maintained cutting tools with sharp cutting edges are less likely to bind and are easier to control. g) Use the power tool, accessories and tool bits etc. in accordance with these instructions, taking into account the working conditions and the work to be performed.
IN THE BOX 1.Guide bar 9.Quick clip of telescopic pole 2.Saw chain 10.Sponge sleeve 3.Adjusting knob for saw chain 11.Seat for shoulder strap tension 12.Rear handle 4.Adjusting knob (red) for guide bar 13.Switch on/off tension 14. Lock-off button (at the other side 5.Cap of oil tank of machine) 6.Cover of guide bar and saw chain 15. Shoulder strap 7.Adjusting knob for head angle (30 16. Sheath of guide bar and chain degrees) 17. Oil bottle 8.Pole (tube) 18. Power cord/cable 19.
ASSEMBLE The pole saw has been assembled in the standard delivery so no need for extra assembling steps. PREPARE 1. Oil filling Open the oil bottle (press the cap on the oil bottle and turn counterclockwise to open it ),then open oil tank cap to fill in the oil. 2.Remove the bar sheath 3.Check the chain tension Always check the chain tension before use, after the first cuts and regularly during use, approx. every 10 minutes.
PREPARE 5.Adjust the pole length Adjust the length of the pole saw according to working situation. Pull the lever of the quick clip to release the pole. Extend the pole to the desired length. Lock the pole in position by locking the quick clip lever and ensure that the pole is secure. If the pole telescopes when the quick clip lever is locked, the nuts need tightening. 6.Adjust the blade head The pole chain saw head can be rotated for different cutting angles from 0ºto 30º.
PREPARE Then turn the knob clockwise to tighten and fix the head in the position. 7.Settle power cord The power cord should be wrapped around the cable clip to avoid long lines stumbling pedestrians or causing electric shock. Cable clip 8.Connect to the power source Insert the power cord/plug to the power source before starting to work.
OPERATE 1. Switch on/off To turn the tool ON, push and hold the safety lock button with your thumb and then squeeze the trigger with your fingers. Once the tool is running. you release the safety lock button. Release the trigger switch to stop the chain. 1.Safety lock button 2.Tr igger switch 2.Check the oil passes Start the machine and check whether the chain can give off a spray of oil within a few seconds. If an oil trace can be seen, the pole saw is lubricating.
OPERATE 4. Start cutting · Cut lower branches first to allow the top branches more room to fall. · When pruning trees, it is important not to make the finishing cut next to the main limb or trunk until you have cut off the farthest lying limb. This will reduce the weight and prevent stripping the bark from the main member. · Under cut the branch 1/3 through for your first cut. Your second cut should over cut to drop the branch off.
MAINTENANCE Motor Cooling To avoid overheating and damage to the motor, always keep the cooling air vents clean and free of sawdust and debris. Adjust the chain tension Always check the chain tension before use, after the first cuts and regularly during use, approx. every 10 minutes. Loosen the bar locking knob(the inner circle)anticlockwise slightly, but do not remove the side cover. Hold up the nose of the guide bar and turn the chain tensioning knob(the out circle) clockwise.
MAINTENANCE · To move the chain forward, use a screwdriver. · Turn the bar over in the vice and repeat on all the other cutting edges. · Check that the depth limiter tooth does not stick out farther than the inspection tool and file any projecting parts with a flat file, rounding off the edges. · After sharpening, remove all traces of filing and dust and lubricate the chain in an oil bath.
MAINTENANCE free place. Always store the product in a place that is inaccessible to children. The ideal storage temperature is between 10 to 30°C. We recommend using the original package for storage or covering the product with a suitable cloth to protect it against dust. Clean the product as described above. Store the product and its accessories in a dry, frostfree place. Always store the product in a place that is inaccessible to children. The ideal storage temperature is between 10 to 30°C.
TECHNICAL DATA Model number YT4348 Rated voltage Rated input power No-load speed Guide bar length Oil tank capacity Chain speed The total length(from the end of handle to top of guide bar) Protection class Degree of protection Net weight(with chain and bar) Cable length Max. Vibration value Measured sound pressure level LPA Measured sound power level LWA Guaranteed sound power level LWA 220-240V/50Hz 750W 5600/min 20cm 60ml 11m/s 1.92~2.
TROUBLESHOOTING Suspected malfunctions are often due to causes that the users can fix themselves. Therefore check the product using this section. In most cases the problem can be solved quickly.
WARRANTY If your device develops a fault, please don’t hesitate to contact our customer service department on 0345 605 2070, we can solve 80% of problems via the phone. 1. These warranty terms cover additional warranty rights and do not affect your statutory warranty rights. All our products are covered by a 3 year manufacturer warranty. 2. Claims must be accompanied by proof of purchase.
AFTER SALES SUPPORT 0345 605 2070 21