Instruction Manual

26 AFTER SALES SUPPORT 0345 605 2067
Chain oil
OPERATE
Attention! The battery cannot be charged
immediately after use, it should cool off for a
period of time. The LED lights switching from
green to red means it can be charged.
Switch on/off
NOTE: Hold the pole saw away from yourself
using both hands. Stand in a secure and stable
position.
i. Push safety switch (10) forward, and press the on/off
switch (14) to turn the product on.
ii. Release the on/off switch (14) to turn the product off.
Check the oil supply
NOTE! With the pruner fully assembled and
adjusted it is important to check the chain oil
supply is dispensing adequate lubrication.
After switching on, run the chain and see if chain oil is being
dispensed as shown.