Instruction Manual

34 AFTER SALES SUPPORT 0345 605 2067

MAINTENANCE

Filing Cutter Depth Gauges

The cutter depth gauge clearance is reduced as cutters are

sharpened. After every second or third sharpening, reset cutter

depth gauges.

1. Place depth gauge tool (.025”) ﬁrmly across top of two

cutters. Make sure depth gauge enters slot in depth gauge

tool.

2. Use medium ﬂat ﬁle. File depth gauge level with depth

gauge tool.

3. Remove depth gauge tool. With ﬂat ﬁle, round off front

corner of cutter depth gauge.

After several hand ﬁlings, have authorized service center or

sharpening service machine sharpen chain. This will insure even

ﬁling.

Cleaning the bar and saw

WARNING!

Wear safety gloves when working on blades

and close to it! Use appropriate tools to remove debris,

e.g. a brush or wooden stick! Never use your bare

hands!

Always use original spare parts for replacement.

i. Keep the bar and chain clean and free of debris. Remove

debris.

ii. Apply a small amount of suitable lubricant, like gear grease, on

the cutting device to retain a good cutting performance.