Instruction Manual

8 AFTER SALES SUPPORT 0345 605 2067
■
Prevent unintentional
starting. Ensure the switch
is in the off-position
before connecting to
power source and/or
battery pack, picking
up or carrying the tool.
Carrying power tools with
your finger on the switch
or energysing power tools
that have the switch on
invites accidents.
■
Remove any adjusting
key or wrench before
turning the power tool
on. A wrench or a key left
attached to a rotating part
of the power tool may
result in personal injury.
■
Do not overreach. Keep
proper footing and
balance at all times. This
enables better control
of the power tool in
unexpected situations.
■
Dress properly. Do not
wear loose clothing or
jewellery. Keep your hair,
clothing and gloves away
from moving parts. Loose
clothes, jewellery or long
SAFETY INFORMATION
Please read these instructions fully before operating or maintaining your machine
hair can be caught in
moving parts.
■
If devices are provided
for the connection of dust
extraction and collection
facilities, ensure these
are connected and
properly used. Use of
dust collection can reduce
dust-related hazards.
Power tool use and care
■
Do not force the power
tool. Use the correct
power tool for your
application. The correct
power tool will do the job
better and safer at the rate
for which it was designed.
■
Do not use the power
tool if the switch does
not turn it on and off. Any
power tool that cannot be
controlled with the switch
is dangerous and must be
repaired.
■
Disconnect the plug from
the power source and/
or the battery pack from
the power tool before