Owner's Manual

Calibrating
the
Color Control
Once
you
know
what strength
of
filter
to use, bring
up
the
Color
control with
your display remote.
If
you haven't already written down the current Color control
setting, do so now.
Look through the filter
and
watch the large blue rectangle in the upper right
and
the white rectangle
around
it
as
you move the Color control
up
and
down. You'll
see
the relative brightness
of
the blue
and
white areas vary. Moving the control one
way will make the blue bar brighter,
and
the other way will make it dimmer. Adjust
the Color control until the blue
and
white areas are
as
close in brightness
as
you can
make
them
(when viewed through the filter).
Calibrating the Tint Control
Setting the
Tint
control uses the same pattern
and
the same filter strength you
already worked
out
for the
Color
control, above.
Bring
up
the
Tint
control using your display remote.
If
you haven't already written
down the current setting, do so now.
Look at the magenta
and
cyan rectangles in the lower right corner,
without
the
filter. The large magenta rectangle has a cyan rectangle inside it. The object
is
to set
the
Tint
control so
that
the magenta
and
cyan areas have the same brightness when
viewed through the filter. Look at those rectangles through the filter
and
move the
Tint
control
up
and
down to see
how
the brightness varies. Then adjust the control
so
that
the colors are
as
close to the same brightness, when viewed through the
filter,
as
you can make them.
Most displays come from the factory with the
Tint
control set correctly
or
very
close to it, so don't be surprised
if
you don't need to change the control
at
all,
or
only need to change it a
notch
or
so.
9