TRANSITION Seat Post Fit Kit Manual
TABLE OF CONTENTS 1. INITIAL SETUP INFORMATION Introduction................................................................................................... 4 Saddle and Seat Post Installation........................................................... 4 Transition Post Cutting Tool Parts......................................................... 5 Transition Frame Geometry...................................................................... 6 2a. VERTICAL HEIGHT / HORIZONTAL SETBACK METHOD Chart 1......
INTRODUCTION The TRANSITION SEAT POST FIT KIT is designed to work specifically with the carbon fiber Specialized Transition bicycles. Due to the extensive range of seat tube angles (saddle setback) that can be achieved and the limited range of vertical seat post adjustment, getting the seat post cut to the right length the first time is crucial. The supplied tools and the following guide are designed to help simplify the sizing process.
TRANSITION FRAME GEOMETRY 12 10 1 8 2 11 9 5 7 3 4 6
TRANSITION FRAME GEOMETRY COMMON GEOMETRY 1 2 3 4 5 6 7 8 SIZE Reach (mm) Stack (mm) Bottom Bracket Drop (mm) Chainstay (mm) Head Tube Angle ( ) Front-Center (mm) Wheelbase (mm) Head Tube Length (mm) S (51) 380 505 72 395 71.5 575 961 100 M (54) 395 516 72 395 72 589 975 110 L (56) 405 526 72 395 72 602 988 120 XL (59) 425 527 72 395 72.5 621 1007 120 M (54) 82 463 78 497 L (56) 82.5 474 78.5 508 XL (59) 83 491 79 524 M (54) 77.5 505 73.5 541 L (56) 78 515 74 552 XL (59) 78.5 531 74.
15130 Concord Circle Morgan Hill, CA 95037 www.specialized.