User Manual

The front and rear panels are a high quality painted surface and the panel
lettering is applied using a silkscreen printing technique.
To clean the front or rear panel, wipe the surface gently using a soft lint-
free cloth to avoid scratching the panel or markings. Paper towels are
not recommended. Commercially available window cleaner solutions
may be used; however, the solution should be applied to the cloth and
not the panel to avoid the seepage of liquid to the inside of the
enclosure.
The Xtramix is wired with a 24 pin interface connector. This 24 pin
connector will accommodate a second Xtramix configured as an
expander.
The following chart represents the audio and power connections
available at the optional 24 pin rear interface connector.
Cleaning
IMPORTANT!
DO NOT USE BRUSHES OR FEATHER DUSTERS TO REMOVE
DUST. THIS MAY CAUSE DUST TO FALL INTO THE OPENINGS
AROUND THE PUSHBUTTON SWITCHES.
Expander pin assignment
13
Interfacing Expanders
PIN 1 -
PIN 2 -
PIN 3 -
PIN 4 -
PIN 5 -
PIN 6 -
PIN 7 -
PIN 8 -
PIN 9 -
PIN 10 -
PIN 11 -
PIN 12 -
COMMON
PLUS 15 VDC
MINUS 15 VDC
SOLO SENSE
SOLO SIGNAL LEFT
SOLO SIGNAL RIGHT
PROGRAM RIGHT
PROGRAM LEFT
ASSIGN SUBGROUP 1
ASSIGN SUBGROUP 2
ASSIGN SUBGROUP 3
ASSIGN SUBGROUP 4
PIN 13 -
PIN 14 -
PIN 15 -
PIN 16 -
PIN 17 -
PIN 18 -
PIN 19 -
PIN 20 -
PIN 21 -
PIN 22 -
PIN 23 -
PIN 24 -
ASSIGN SUBGROUP 5
ASSIGN SUBGROUP 6
ASSIGN SUBGROUP 7
ASSIGN SUBGROUP 8
EFFECTS BUSS 1
EFFECTS BUSS 2
EFFECTS BUSS 3
EFFECTS BUSS 4
EFFECTS BUSS 5
EFFECTS BUSS 6
EFFECTS BUSS 7
EFFECTS BUSS 8
Chapter 3 Installation Section