Color Video Monitor Instruction Manual

ManualsBrandsSpeco Technologies ManualsMonitorColor Video Monitor

Color Video Monitor

Instruction Manual

Read this manual thoroughly before use,

and retain it for maintenance.

The product’s exterior design and specifications may subject to change

without prior notice for quality improvement.

Summary of content (13 pages)

PAGE 1
Color Video Monitor Instruction Manual Read this manual thoroughly before use, and retain it for maintenance. The product’s exterior design and specifications may subject to change without prior notice for quality improvement.
PAGE 2
Color Monitor Instruction Manual Contents Page Warning...............................................................................................3 Precaution ..........................................................................................3 Introduction ........................................................................................3 Important Safeguards ........................................................................4 Accessories................................................
PAGE 3
Color Monitor Instruction Manual WARNING – To Prevent Fire or Shock Hazard, Do Not Expose This Monitor To Rain or Moisture. PRECAUTION Graphic Symbol Explanation The lightning flash with arrowhead symbol, within an equilateral triangle, is Intended to alert the user to the presence of uninsulated ‘dangerous voltage’ within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons.
PAGE 4
PAGE 5
Color Monitor Instruction Manual IMPORTANT SAFEGUARDS All the safety and operating instructions should be read before the appliance is operated. 1. Retain instructions: The safety and operating instructions should be retained for future reference. 2. Heed Warnings: All warnings on the monitor and in the operating instructions should be adhered to. 3. Follow Instructions: All operating and use instructions should be followed. 4. Cleaning: Unplug the monitor from the wall outlet before cleaning.
PAGE 6
Color Monitor Instruction Manual for long periods of time, unplug it from the wall outlet and disconnect the cable system. This will prevent damage to the monitor due to lighting and power-line surges. 13. Overloading: Do not overload wall outlets and extension cords as this can result in a risk of fire or electric shock. 14.
PAGE 7
Color Monitor Instruction Manual FUNCTION DESCRIPTION for 10 / 14 Inch 10 Inch 14 Inch 1 6 1 5 4 3 2 FRONT PANEL CONTROLS 1. POWER ON/OFF SWITCH The switch provides power on-off control. 2. VOLUME (Option) Rotate the switch for adjustment of the volume when needed. 3. CONTRAST The control permits adjustment of the contrast between the light and dark areas of the picture. 4. BRIGHTNESS The control supports the adjustment of the overall picture shade and brightness. 5.
PAGE 8
Color Monitor Instruction Manual 10 Inch AUDIO IN 14 Inch VIDEO IN S-VHS VIDEO LO Y/C HI OUT OUT S-VHS 9 AUDIO IN 8 11 VIDEO IN S-VHS VIDEO LO Y/C OUT HI 7 9 7 7 S-VHS OUT 9 8 8 11 OPTION: Y/C FUNCTION 11 10 AUDIO FUNCTION REAR PANEL CONTROLS 7. VIDEO IN & OUT These BNC Connectors permits ‘loop-through’ connection of a video signal in installations where it is desirable to display the video signal on more than one monitor. A standard 1.
PAGE 9
Color Monitor Instruction Manual FUNCTION DESCRIPTION for 15 / 17 / 21 Inch When adjusting the controls, LED light will flash; when adjust to the end, LED light will stop flash but just light on. LED light will be totally off when stop adjusting. 65 43 2 1 FRONT PANEL CONTROLS 1. POWER ON/OFF SWITCH The switch provides power on-off control. 2. TINT ( NTSC only ) The controls permit adjustment of the R.G.B. phase differences as you need . 3.
PAGE 10
Color Monitor Instruction Manual FUNCTION DESCRIPTION for 14 / 15 / 17 / 21 Inch Grounding 7 C Signal V1 IN AU1 IN V2 IN AU2 IN Y/C IN 9 OUT V1 OUT V2 OUT AU1 OUT AU2 OUT 8 V1 AU1 V2 AU2 HI LO VIDEO Y/C Grounding Y Signal 10 11 12 REAR PANEL CONTROLS 7. VIDEO IN & OUT 8. These BNC Connectors permits ‘loop-through’ connection of a video signal in installations where it is desirable to display the video signal on more than one monitor. A standard 1.
PAGE 11
Color Monitor Instruction Manual INSTALLATION CAUTION: Do not install this monitor in an excessively hot location, or in any way obstruct the ventilation openings in the cabinet. Premature component failure or damage to the cabinet may result. When the monitor is not to be used for several days, it is advisable to disconnect the AC power cord from the utility outlet. To reduce the risk of electric shock , do not remove cover or back. No user-serviceable parts are inside.
PAGE 12
Color Monitor Instruction Manual SPECIFICATION General 10” 14” / 14”H 15”H 17”H 21” Location Indoor ○ ○ ○ ○ Construction Steel cabinet with ○ ○ ○ ○ ○ ○ ○ ○ 20/21 24/25 26 / 27 Plastic front Finish Black or white matte Texture coat finish N.W. / G.W. (kg) 8.5 / 9.
PAGE 13
Color Monitor Instruction Manual 10" 14" /14”H 15"H 17”H 21” NTSC 525 lines, 60 fields/ sec. ○ ○ ○ ○ PAL 625 lines, 50 fields/ sec. ○ ○ ○ ○ Y/C (In /Out) – 4 pin DIN “IN” only “IN” only / IN / OUT IN / OUT IN / OUT IN / OUT Video (In/Out) – BNC jack 1 set 1 set 2 sets 2 sets 2 sets With audio – Phone jack 1 set 1 set 2 sets 2 sets 2 sets 10~150mVp-p ○ ○ ○ ○ 1W / 8 ohm (Incl.