CVC6146SCS Series 540 Line Color Dome Camera Wall & Ceiling Mountable Please read this manual thoroughly before operation and keep it handy for further reference.
WARNING & CAUTION CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION : TO REDUCE THE RISK OF ELECTRIC SHOCK DO NOT REMOVE COVER (OR BACK). NO USER SERVICEABLE PARTS INSIDE REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
Contents Package Contents 3 Precautions 4 Camera Installation 5 Internal Components 6 Features 8 OSD 9 1
Operating Your Camera SET UP 10 SET UP LENS 10 SHUTTER SPEED CONTROL 10 BACK LIGHT 10 AUTO GAIN (AGC) 10 WHITE BALANCE 11 CAMERA TITLE 11 MIRROR DAY/NIGHT/SYNC 12 12 MOTION DETECTION 12 PRIVACY 12 GAMMA 13 RESET 13 ADJUST 13 EXIT 13 Specifications 14 Dimensions 15 Warranty 16 2
PACKAGE CONTENTS • Please make sure that the following items are included in the package: 1 CVC6146SCS Series Camera 2 Mounting Screws 1 Video test Connector Please leave this manual with the end-user for future reference.
PRECAUTIONS • THIS DOME CAMERA SHOULD BE ONLY INSTALLED BY QUALIFIED PERSONNEL • TO PREVENT A FIRE OR ELECTRICAL HAZARD PLEASE USE PROPER POWER CABLE • THE DOME COVER SHOULD BE TREATED WITH CARE. DO NOT CLEAN THE COVER WITH AN ABRAISIVE CLEANING MATERIAL - PLEASE USE A SOFT CLOTH OR TISSUE TO CLEAN THE DOME COVER • THERE ARE NO USER-SERVICEABLE PARTS INSIDE.
CAMERA INSTALLATION CONNECT POWER CABLE 1. WHEN USING 12 VOLTS DC (constant voltage 500 mA) POWER INPUT:RED CONNECT CENTER:(+) POWER SUPPLY 2. WHEN USING 24 VOLTS AC (20 Volt Amps) -CONNECT ACCESSORY CABLE TO THE POWER JACK AND CONNECT 24V AC TO THE LEAD POWER RED(+) CONNECT AC 24V BLACK:(-) POWER SUPPLY 3. CONNECT VIDEO CABLE -CONNECT BNC CABLE TO THE BNC JACK.
INTERNAL COMPONENTS 1. Mechanical (2) Joy Stick Controller (1) DC Auto iris Lens (2.8~11mm) (1) DC AUTO-IRIS LENS Adjust between TÅÆW (TELE ÅÆ WIDE) to set the angle (focal length) Set the focus by adjusting ∞ÅÆN NOTE: BOTH OF THE ABOVE ADJUSTMENTS GET LOCKED INTO POSITION THROUGH THE USE OF "LOCKING HANDLES".
INTERNAL COMPONENTS 2. Joy Stick Video Test Terminal OSD Joystick Switch UP SET RIGHT LEFT DOWN Push the Joy stick for one second, and the OSD appears on the screen. Move the Joy Stick up, down, left & right to control the OSD functions.
Features BLC When the image is in front of strong background lighting, your camera allows you to get a clear image. High Resolution Horizontal resolution of 540 TV lines is achieved by using a SONY Double Speed CCD with 410,000 pixels, yielding pictures with a high S/N ratio. OSD All camera functions are menu driven for easy use.
Operating your camera OSD Function LENS DC MANUAL SHUTTER AUTO FLK OFF ON OFF ON FIXED MANUAL FIXED MANUAL BLC AGC WHITE BAL. ATW AWB FUNCTION RETURN CAMERA ID ON OFF MIRROR ON OFF DAY / NIGHT COLOR MOTION DET ON PRIVACY ON GAMMA 0.05~1.
Operating your camera – SETUP 1) LENS Selects Lens Type. 2) SHUTTER Adjusts shutter settings. Flicker-less mode (FLK) reduces on-screen flickering. Electronic Shutter Control (AUTO) adjusts brightness level on screen. Manual mode allows you to adjust the shutter speed from1/60~1/120,000 of a second (NTSC), or 1/50~1/100,000(PAL). FLK is the only option available when the camera lens is set to the recommended DC mode.
5) WHITE BAL. BAL Controls color on the screen. Select Auto Tracking White Balance (ATW) when the color temp. is 2400°K~12000°K (for example when under a fluorescent light or outdoors). Manual mode allows you to increase or decrease the red or blue factor on screen. Auto White Balance Control (AWC) automatically adjusts the white balance to your specific environment. 6) FUNCTION (6-1) RETURN Return to the main SETUP menu.
(6-3) MIRROR Produce a horizontal mirror image on screen. (6-4) DAY / NIGHT AUTO = Automatically detect color or black/white. Delay – When the Day & Night function starts or stops (0~15sec) Start Level – Set the brightness level where the Day & Night function start to operate End Level – Set the brightness level where the Day & Night function stops operate COLOR = Full time color mode B/W = Full time B/W mode (6-5) MOTION DET AREA = Select motion detection area.
AREA SEL = Select a motion detection grid (top left, top ,right, bottom left, bottom right) to modify. AREA STATE = Activate or deactivate the selected grid. LEFT/RIGHT/TOP/BOTTOM = Alter the dimensions of the selected grid. COLOR = Select color of privacy area. (6-7) GAMMA Sharpen the image on screen. Excessive sharpening may cause picture noise. (6-8) LANGUAGE (English / 한국어 / 汉语/漢語 / 日本語) Choose language that should be displayed. (6-9) RESET Restore all factory default settings.
SPECIFICATIONS ITEM CVC6146SCS Series Power Source DC12V & AC24V (Dual Voltage) Image Sensor 1/3”, SONY SUPER HAD CCD, 410,000 , pixels p Effective Pixels 755(H) x 582(V) , 1/3” CCD Maximum Aperture Ratio 1 : 1.3 ~2.0 Scanning System 2 : 1 Interlaced 525 Lines / 60Fields / 30Frames Video Output 1.
DIMENSIONS * SIDE VIEW * TOP VIEW 15
WARRANTY 16
MEMO
0 New Highway Amityville, NY 11701 631-957-8700 www.specotech.com Rev. 100125 Speco Technologies is constantly developing product improvements. We reserve the right to modify product design and specifications without notice and without incurring any obligation.
