Installation Manual

Compatible Model

Optional Accessories

Installation Instruction Diagram

Dimensions

• HT7246iHR, HT7247iHR, HT7250iHR

• HT7248FFi

Dome Junction Box

The following items are included in this package.

• CVCJBD / CVCJBDW

• 1 Base Sponge Gasket

• 4 Tapping Screws 4 x 25

• 3 Machine Screws M4 x 15, PH

• 2 Machine Screws M4 x 15(Washer Based)

Side ViewFront View

CVCJBD / CVCJBDW

Package Contents

200 New Highway, Amityville NY 11701

800.645.5516 / www.specotech.com

Installation Guide

5.12” dia 1.93”

1.57”

0.73” dia

1.18” dia

CEILING

TAPPING SCREW 4X25, 4EA

JUNCTION BOX ASSEMBLY

JUNCTION BASE SPONGE

1-1. Install junction box onto the ceiling by using the screws provided.

INTPM

Pendant Mount Wall Mount

INTWM

PAGE 1
Installation Guide 200 New Highway, Amityville NY 11701 800.645.5516 / www.specotech.com CVCJBD / CVCJBDW Dome Junction Box Optional Accessories INTPM INTWM Compatible Models • HT7246iHR, HT7247iHR, HT7250iHR • HT7248FFi Pendant Mount Package Contents Installation Instruction Diagram The following items are included in this package. • CVCJBD / CVCJBDW • 1 Base Sponge Gasket • 4 Tapping Screws 4 x 25 Wall Mount 1-1. Install junction box onto the ceiling by using the screws provided.
PAGE 2
Installation Guide CVCJBD / CVCJBDW 200 New Highway, Amityville NY 11701 800.645.5516 / www.specotech.com Installation Instruction Diagram Installation Instruction Diagram 1-2. Install INTPM onto ceiling. 1-3. Install junction box onto INTPM as shown in the image below. 2. Arrange each piece as shown in the image below. 3. Fasten the camera onto the junction box. DOME JUNCTION BASE SPONGE MACHINE SCREW M4X15, 3EA JUNCTION ASSEMBLY MACHINE SCREW M4X15, 2EA 1-4. Install INTWM onto wall. 1-5.