DVR User Manual

4- & 8-Channel Digital Video Recorder

NOTE: Selecting Use Mobile sets the recorded image resolution to Standard automatically

regardless of your Record settings.

NOTE: Selecting Use Mobile sets the remote watch quality to Basic automatically regardless

of your Network – Remote Watch settings.

NOTE: Selecting Use Mobile sets the Speco Remote service to be enabled automatically

regardless of your Speco Remote settings.

NOTE: You can access a remote DVR and monitor live video images using media players,

such as VLC Player, supporting RTSP service. Start the media player on your local PC and

enter “rtsp://ID:Password@IP address:RTSP port number/track ID=‘channel number’”, or

start Internet Explorer on your Blackberry or other mobile devices and enter “http://IP address:

Speco Remote port number/”.

NOTE: Some media players might play video properly depending on network conditions.

NOTE: RTSP service might not be supported, depending on the type of media player.

Highlight the Speco Remote tab, and the Speco Remote setup screen displays.

Notification

Highlight Notification in the Network menu and press the button. The Notification setup screen

displays.

Figure 49 ─ Speco Remote setup screen.

Highlight Enable Speco Remote Service and

press the

button to toggle between On and

Off. See Appendix – Speco Remote for detailed

descriptions of the Speco Remote service.

Highlight the box beside Port and press the

button. Set the port number used when accessing

Speco Remote by using the Up and Down arrow

buttons to increase or decrease the numbers.

Figure 50 ─ Notification Callback setup screen.

The DVR can be set up to contact a computer

running Speco Central (Remote Administration

System) when an event occurs. Highlight LAN

and press the

button to toggle between On and

Off. When LAN is turned On you can change

the IP addresses.

Highlight the IP Address box that you want to

change and press the

button. Use the arrow

buttons to enter the IP address of the computer

you want contacted during an event. You can

enter up to five IP addresses.