Manual

12/56
 Communication Protocol Setup
1 2 3 4
ON
ON
 Select an appropriate Protocol with the DIP switch combination.
Switch Mode
Protocol
P0
(Pin 1)
P1
(Pin 2)
P2
(Pin 3)
OFF OFF OFF PELCO-D, 2400 bps
ON OFF OFF PELCO-D, 9600 bps
OFF ON OFF PELCO-P, 4800 bps
ON ON OFF PELCO-P, 9600 bps
Others Reserved
 Match the camera protocol with the camera protocol in the
setting of your DVR or controller to control the camera.
 Adjust the DIP switch after turning off the camera. If you
changed the camera protocol by changing the DIP S/W, the
change will be effective after you reboot the camera.
 The factory default protocol is “Pelco-D, 2400 bps”.
INSTALLATION
2