Manual

21/56
Preset

Function
MAX. 209 presets can be configured except the Reserv
ed Presets
(Hot Keys). Camera parameters such as White Balance, Auto
Exposure and others can be set up independently and each
preset can have its own parameter values independently from
the other persets. When setting up presets with a controller,
Label should be blank and "Camera Adjust" should be set to
"GLOBAL" as the default. To change the parameters, enter into
OSD menu.

Setting Preset
s
Set Preset
[
1~255
]

Running Preset
s
Go Preset
[
1~255
]

Deleting Preset
s
To delete Preset
s
, enter in
to
OSD
menu
.
Swing

Function
This
function
is that
the camera moves
repetitively
between
two preset positions at programmed speeds. When a swing
function runs, the camera moves from the preset assigned as
the 1st point to the preset assigned as the 2nd point in
CW(Clockwise) direction. Then the camera moves from the
preset assigned as the 2nd point to the preset assigned as the
1st point in CCW(Counterclockwise) direction.
In case that the preset assigned as the 1st point and the
preset assigned as the 2nd point are same, the camera turns
on its axis by 360° in CW(Clockwise) direction and then it
turns back on its axis by 360° in CCW(Counterclockwise)
direction. The Swing speed is defined from 1°/sec to
180°/sec.

Setting Swing
s
To set
Swing
,
enter into
OSD menu
.

Running Swing
s
Method 1) <Run Pattern> [Swing NO. + 10]
Method 2) <Go Preset> [Swing NO. + 140]
ex) Run Swing 3 : <Run Pattern> [13]
ex) Run Swing 3 : <Go Preset> [143]

Deleting Swing
s
To delete
Swing
s
, enter into
OSD menu
.
1st Preset
2nd Preset
1
C
W
D
i
r
e
c
t
i
o
n
2
C
C
W
D
i
r
e
c
t
i
o
n
OPERATION
3